完成了WIFI连接，MQTT订阅发布，光照监测，温湿度数据，继电器控制

2026-04-19 19:30:52 +08:00
commit 8548f04733
32 changed files with 2831 additions and 0 deletions
--- a/components/relay_ctrl/relay_ctrl.c
+++ b/components/relay_ctrl/relay_ctrl.c
@@ -0,0 +1,102 @@
+#include "relay_ctrl.h"
+
+#include "esp_check.h"
+#include "esp_log.h"
+
+static const char *TAG = "relay_ctrl";
+
+typedef struct {
+    bool inited;
+    bool active_high;
+    gpio_num_t pins[RELAY_CTRL_ID_MAX];
+    bool states[RELAY_CTRL_ID_MAX];
+} relay_ctx_t;
+
+static relay_ctx_t s_ctx;
+
+static inline int relay_level_from_state(bool on)
+{
+    return (on == s_ctx.active_high) ? 1 : 0;
+}
+
+static esp_err_t relay_validate_id(relay_ctrl_id_t relay_id)
+{
+    ESP_RETURN_ON_FALSE(relay_id >= RELAY_CTRL_ID_1 && relay_id < RELAY_CTRL_ID_MAX,
+                        ESP_ERR_INVALID_ARG, TAG, "invalid relay id");
+    return ESP_OK;
+}
+
+esp_err_t relay_ctrl_init(gpio_num_t relay1_gpio, gpio_num_t relay2_gpio, bool active_high)
+{
+    ESP_RETURN_ON_FALSE(GPIO_IS_VALID_OUTPUT_GPIO(relay1_gpio), ESP_ERR_INVALID_ARG, TAG, "relay1 gpio invalid");
+    ESP_RETURN_ON_FALSE(GPIO_IS_VALID_OUTPUT_GPIO(relay2_gpio), ESP_ERR_INVALID_ARG, TAG, "relay2 gpio invalid");
+
+    s_ctx.active_high = active_high;
+    s_ctx.pins[RELAY_CTRL_ID_1] = relay1_gpio;
+    s_ctx.pins[RELAY_CTRL_ID_2] = relay2_gpio;
+
+    const gpio_config_t io_cfg = {
+        .pin_bit_mask = (1ULL << relay1_gpio) | (1ULL << relay2_gpio),
+        .mode = GPIO_MODE_OUTPUT,
+        .pull_down_en = GPIO_PULLDOWN_DISABLE,
+        .pull_up_en = GPIO_PULLUP_DISABLE,
+        .intr_type = GPIO_INTR_DISABLE,
+    };
+    ESP_RETURN_ON_ERROR(gpio_config(&io_cfg), TAG, "relay gpio config failed");
+
+    // 默认上电全部断开
+    s_ctx.states[RELAY_CTRL_ID_1] = false;
+    s_ctx.states[RELAY_CTRL_ID_2] = false;
+    ESP_RETURN_ON_ERROR(gpio_set_level(relay1_gpio, relay_level_from_state(false)), TAG, "relay1 set init level failed");
+    ESP_RETURN_ON_ERROR(gpio_set_level(relay2_gpio, relay_level_from_state(false)), TAG, "relay2 set init level failed");
+
+    s_ctx.inited = true;
+    ESP_LOGI(TAG, "继电器初始化完成: relay1=GPIO%d relay2=GPIO%d active_high=%d",
+             relay1_gpio,
+             relay2_gpio,
+             active_high);
+    return ESP_OK;
+}
+
+esp_err_t relay_ctrl_set(relay_ctrl_id_t relay_id, bool on)
+{
+    ESP_RETURN_ON_FALSE(s_ctx.inited, ESP_ERR_INVALID_STATE, TAG, "relay not initialized");
+    ESP_RETURN_ON_ERROR(relay_validate_id(relay_id), TAG, "invalid relay id");
+
+    ESP_RETURN_ON_ERROR(gpio_set_level(s_ctx.pins[relay_id], relay_level_from_state(on)),
+                        TAG,
+                        "relay set level failed");
+    s_ctx.states[relay_id] = on;
+    ESP_LOGI(TAG, "继电器%d -> %s (GPIO%d level=%d)",
+             relay_id + 1,
+             on ? "ON" : "OFF",
+             s_ctx.pins[relay_id],
+             relay_level_from_state(on));
+    return ESP_OK;
+}
+
+esp_err_t relay_ctrl_toggle(relay_ctrl_id_t relay_id)
+{
+    ESP_RETURN_ON_FALSE(s_ctx.inited, ESP_ERR_INVALID_STATE, TAG, "relay not initialized");
+    ESP_RETURN_ON_ERROR(relay_validate_id(relay_id), TAG, "invalid relay id");
+
+    return relay_ctrl_set(relay_id, !s_ctx.states[relay_id]);
+}
+
+esp_err_t relay_ctrl_get(relay_ctrl_id_t relay_id, bool *on_out)
+{
+    ESP_RETURN_ON_FALSE(s_ctx.inited, ESP_ERR_INVALID_STATE, TAG, "relay not initialized");
+    ESP_RETURN_ON_FALSE(on_out != NULL, ESP_ERR_INVALID_ARG, TAG, "on_out is null");
+    ESP_RETURN_ON_ERROR(relay_validate_id(relay_id), TAG, "invalid relay id");
+
+    *on_out = s_ctx.states[relay_id];
+    return ESP_OK;
+}
+
+esp_err_t relay_ctrl_set_all(bool relay1_on, bool relay2_on)
+{
+    ESP_RETURN_ON_FALSE(s_ctx.inited, ESP_ERR_INVALID_STATE, TAG, "relay not initialized");
+    ESP_RETURN_ON_ERROR(relay_ctrl_set(RELAY_CTRL_ID_1, relay1_on), TAG, "set relay1 failed");
+    ESP_RETURN_ON_ERROR(relay_ctrl_set(RELAY_CTRL_ID_2, relay2_on), TAG, "set relay2 failed");
+    return ESP_OK;
+}