wangbeihong
97d6d10731
主要更改包括： 1. 传感器功能改进： - 实现水位传感器状态变化检测，正确处理有水/无水状态 - 优化温湿度数据显示，使用更清晰的格式 2. LCD界面优化： - 适配80*160屏幕尺寸，调整所有页面布局 - 温湿度页面：使用"C"作为温度单位，优化显示位置 - 食物重量页面：调整显示位置，简化状态文本 - 水位页面：替换圆形图标为矩形背景，提升视觉效果 - 系统状态页面：简化状态文本，优化布局 - 统一标题栏设计，添加分隔线 3. 功能增强： - 实现ST7735_DrawLine函数，用于绘制分隔线 - 实现ST7735_FillCircle函数，用于图形绘制 - 添加步进电机驱动代码，支持电机控制 4. 其他优化： - 修复未使用变量的编译警告 - 调整字体大小和显示位置，提高可读性 - 优化颜色方案，提升视觉体验 这些更改使界面更加美观、清晰，同时增强了系统的功能和稳定性。
109 lines
3.6 KiB
C
109 lines
3.6 KiB
C
/* USER CODE BEGIN Header */
|
|
/**
|
|
******************************************************************************
|
|
* @file gpio.c
|
|
* @brief This file provides code for the configuration
|
|
* of all used GPIO pins.
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* Copyright (c) 2026 STMicroelectronics.
|
|
* All rights reserved.
|
|
*
|
|
* This software is licensed under terms that can be found in the LICENSE file
|
|
* in the root directory of this software component.
|
|
* If no LICENSE file comes with this software, it is provided AS-IS.
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
/* USER CODE END Header */
|
|
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "gpio.h"
|
|
|
|
/* USER CODE BEGIN 0 */
|
|
|
|
/* USER CODE END 0 */
|
|
|
|
/*----------------------------------------------------------------------------*/
|
|
/* Configure GPIO */
|
|
/*----------------------------------------------------------------------------*/
|
|
/* USER CODE BEGIN 1 */
|
|
|
|
/* USER CODE END 1 */
|
|
|
|
/** Configure pins as
|
|
* Analog
|
|
* Input
|
|
* Output
|
|
* EVENT_OUT
|
|
* EXTI
|
|
*/
|
|
void MX_GPIO_Init(void)
|
|
{
|
|
|
|
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
|
|
|
/* GPIO Ports Clock Enable */
|
|
__HAL_RCC_GPIOC_CLK_ENABLE();
|
|
__HAL_RCC_GPIOD_CLK_ENABLE();
|
|
__HAL_RCC_GPIOA_CLK_ENABLE();
|
|
__HAL_RCC_GPIOB_CLK_ENABLE();
|
|
|
|
/*Configure GPIO pin Output Level */
|
|
HAL_GPIO_WritePin(GPIOA, HX711_SCK_Pin|LCD_DC_Pin|LCD_RESET_Pin|STEPPER_IN4_Pin, GPIO_PIN_RESET);
|
|
|
|
/*Configure GPIO pin Output Level */
|
|
HAL_GPIO_WritePin(GPIOC, LCD_CS_Pin|LCD_BLK_Pin|MOTOR_Pin|STEPPER_IN1_Pin
|
|
|STEPPER_IN2_Pin|STEPPER_IN3_Pin, GPIO_PIN_RESET);
|
|
|
|
/*Configure GPIO pin Output Level */
|
|
HAL_GPIO_WritePin(GPIOB, LED2_Pin|LED1_Pin, GPIO_PIN_SET);
|
|
|
|
/*Configure GPIO pins : KEY1_Pin KEY2_Pin KEY3_Pin KEY4_Pin */
|
|
GPIO_InitStruct.Pin = KEY1_Pin|KEY2_Pin|KEY3_Pin|KEY4_Pin;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
|
|
GPIO_InitStruct.Pull = GPIO_PULLUP;
|
|
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
|
|
|
|
/*Configure GPIO pin : HX711_DOUT_Pin */
|
|
GPIO_InitStruct.Pin = HX711_DOUT_Pin;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
HAL_GPIO_Init(HX711_DOUT_GPIO_Port, &GPIO_InitStruct);
|
|
|
|
/*Configure GPIO pins : HX711_SCK_Pin LCD_DC_Pin LCD_RESET_Pin STEPPER_IN4_Pin */
|
|
GPIO_InitStruct.Pin = HX711_SCK_Pin|LCD_DC_Pin|LCD_RESET_Pin|STEPPER_IN4_Pin;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
|
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
|
|
|
/*Configure GPIO pins : LCD_CS_Pin LCD_BLK_Pin MOTOR_Pin STEPPER_IN1_Pin
|
|
STEPPER_IN2_Pin STEPPER_IN3_Pin */
|
|
GPIO_InitStruct.Pin = LCD_CS_Pin|LCD_BLK_Pin|MOTOR_Pin|STEPPER_IN1_Pin
|
|
|STEPPER_IN2_Pin|STEPPER_IN3_Pin;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
|
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
|
|
|
|
/*Configure GPIO pins : LED2_Pin LED1_Pin */
|
|
GPIO_InitStruct.Pin = LED2_Pin|LED1_Pin;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
|
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
|
|
|
|
/*Configure GPIO pins : HC_SR505_IO_Pin M3_IO_Pin */
|
|
GPIO_InitStruct.Pin = HC_SR505_IO_Pin|M3_IO_Pin;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
|
|
|
|
}
|
|
|
|
/* USER CODE BEGIN 2 */
|
|
|
|
/* USER CODE END 2 */
|