增加对LCD屏幕的支持，并初始化RTC配置

2026-02-13 20:44:32 +08:00
parent befe00c505
commit c55bb2bdfb
20 changed files with 1748 additions and 54 deletions
--- a/Core/Bsp/BSP_Device/spi_st7735s/README.md
+++ b/Core/Bsp/BSP_Device/spi_st7735s/README.md
@@ -0,0 +1,212 @@
+# ST7735S LCD显示屏驱动使用说明
+
+## 简介
+本驱动为ST7735S彩色TFT LCD显示屏提供完整的控制接口，支持SPI通信、GPIO控制、背光控制等功能。
+
+## 硬件连接
+
+### 基本引脚连接
+```
+ST7735S引脚    STM32引脚      说明
+----------    ----------    ------
+VCC           3.3V          电源正极
+GND           GND           电源地
+SCL           SPIx_SCK      SPI时钟线
+SDA           SPIx_MOSI     SPI数据线
+RS/DC         GPIOx_Pinx    数据/命令选择
+RST           GPIOx_Pinx    复位控制
+CS            GPIOx_Pinx    片选信号
+BL            GPIOx_Pinx    背光控制(可选)
+```
+
+## 初始化步骤
+
+### 1. 包含头文件
+```c
+#include "spi_st7735s.h"
+```
+
+### 2. 定义全局句柄
+```c
+ST7735S_HandleTypeDef lcd_handle;
+```
+
+### 3. 配置GPIO和SPI参数
+```c
+void LCD_GPIO_Config(void)
+{
+    // 配置SPI句柄
+    lcd_handle.spi_handle = &hspi1;  // 根据实际使用的SPI接口调整
+    
+    // 配置控制引脚
+    lcd_handle.gpio_config.rst_port = GPIOA;
+    lcd_handle.gpio_config.rst_pin = GPIO_PIN_0;
+    
+    lcd_handle.gpio_config.dc_port = GPIOA;
+    lcd_handle.gpio_config.dc_pin = GPIO_PIN_1;
+    
+    lcd_handle.gpio_config.cs_port = GPIOA;
+    lcd_handle.gpio_config.cs_pin = GPIO_PIN_2;
+    
+    // 配置背光引脚(可选)
+    lcd_handle.gpio_config.bl_port = GPIOA;
+    lcd_handle.gpio_config.bl_pin = GPIO_PIN_3;
+    
+    // 配置显示参数
+    lcd_handle.display_param.width = 128;
+    lcd_handle.display_param.height = 160;
+    lcd_handle.display_param.orientation = ST7735S_ORIENTATION_PORTRAIT;
+    lcd_handle.display_param.color_mode = ST7735S_COLOR_MODE_16BIT;
+}
+```
+
+### 4. 完整初始化函数
+```c
+HAL_StatusTypeDef LCD_Init(void)
+{
+    elog_i("LCD", "开始初始化ST7735S LCD");
+    
+    // 配置GPIO参数
+    LCD_GPIO_Config();
+    
+    // 初始化LCD
+    HAL_StatusTypeDef ret = ST7735S_Init(&lcd_handle);
+    
+    if (ret == HAL_OK) {
+        elog_i("LCD", "LCD初始化成功");
+        
+        // 设置显示方向(可选，默认竖屏)
+        ST7735S_SetOrientation(&lcd_handle, ST7735S_ORIENTATION_LANDSCAPE);
+        
+        // 清屏为白色
+        ST7735S_ClearScreen(&lcd_handle, 0xFFFF);
+        
+        // 绘制测试图案
+        LCD_DrawTestPattern();
+    } else {
+        elog_e("LCD", "LCD初始化失败");
+    }
+    
+    return ret;
+}
+```
+
+## 常用操作示例
+
+### 基本绘图操作
+```c
+void LCD_DrawTestPattern(void)
+{
+    // 绘制红色背景
+    ST7735S_ClearScreen(&lcd_handle, 0xF800);
+    
+    // 绘制绿色矩形
+    for (int y = 20; y < 60; y++) {
+        for (int x = 30; x < 90; x++) {
+            ST7735S_DrawPixel(&lcd_handle, x, y, 0x07E0);  // 绿色
+        }
+    }
+    
+    // 绘制蓝色线条
+    for (int i = 0; i < 50; i++) {
+        ST7735S_DrawPixel(&lcd_handle, 100 + i, 80 + i, 0x001F);  // 蓝色
+    }
+}
+```
+
+### 背光控制
+```c
+void LCD_Backlight_Control(void)
+{
+    // 关闭背光
+    ST7735S_SetBacklight(&lcd_handle, ST7735S_BACKLIGHT_OFF);
+    HAL_Delay(2000);
+    
+    // 开启背光
+    ST7735S_SetBacklight(&lcd_handle, ST7735S_BACKLIGHT_ON);
+}
+```
+
+### 显示方向切换
+```c
+void LCD_Change_Orientation(void)
+{
+    // 切换到横屏模式
+    ST7735S_SetOrientation(&lcd_handle, ST7735S_ORIENTATION_LANDSCAPE);
+    ST7735S_ClearScreen(&lcd_handle, 0xFFFF);
+    
+    // 切换回竖屏模式
+    ST7735S_SetOrientation(&lcd_handle, ST7735S_ORIENTATION_PORTRAIT);
+    ST7735S_ClearScreen(&lcd_handle, 0xFFFF);
+}
+```
+
+### 电源管理
+```c
+void LCD_Power_Management(void)
+{
+    // 进入睡眠模式(节能)
+    ST7735S_SetPowerState(&lcd_handle, ST7735S_POWER_SLEEP_IN);
+    HAL_Delay(3000);
+    
+    // 退出睡眠模式
+    ST7735S_SetPowerState(&lcd_handle, ST7735S_POWER_SLEEP_OUT);
+    
+    // 关闭显示
+    ST7735S_SetPowerState(&lcd_handle, ST7735S_POWER_OFF);
+    HAL_Delay(2000);
+    
+    // 重新开启显示
+    ST7735S_SetPowerState(&lcd_handle, ST7735S_POWER_ON);
+}
+```
+
+## 颜色格式说明
+
+ST7735S使用RGB565格式：
+- 红色：0xF800 (11111 00000 00000)
+- 绿色：0x07E0 (00000 111111 00000)
+- 蓝色：0x001F (00000 000000 11111)
+- 白色：0xFFFF (11111 111111 11111)
+- 黑色：0x0000 (00000 000000 00000)
+
+## 错误处理
+
+```c
+void LCD_Error_Handler(void)
+{
+    if (!ST7735S_IsInitialized(&lcd_handle)) {
+        elog_e("LCD", "LCD未初始化");
+        return;
+    }
+    
+    // 检查背光状态
+    ST7735S_BacklightState_t bl_state = ST7735S_GetBacklightState(&lcd_handle);
+    if (bl_state == ST7735S_BACKLIGHT_OFF) {
+        elog_w("LCD", "背光已关闭");
+    }
+    
+    // 获取显示尺寸
+    uint16_t width = ST7735S_GetWidth(&lcd_handle);
+    uint16_t height = ST7735S_GetHeight(&lcd_handle);
+    elog_i("LCD", "当前分辨率: %dx%d", width, height);
+}
+```
+
+## 注意事项
+
+1. **时序要求**：严格按照ST7735S数据手册的时序要求操作
+2. **电源管理**：合理的电源管理可以延长LCD寿命
+3. **SPI速度**：建议SPI时钟频率不超过10MHz
+4. **引脚配置**：确保所有控制引脚都正确配置为输出模式
+5. **背光控制**：背光引脚为可选配置，如果不使用可以设为NULL
+6. **错误处理**：所有API都有返回值检查，请务必处理错误情况
+
+## 调试信息
+
+驱动内置详细的日志输出，可通过EasyLogger查看：
+- INFO级别：正常操作信息
+- DEBUG级别：详细的操作过程
+- ERROR级别：错误和异常情况
+
+使用`elog_filter_lvl_set("LCD", ELOG_LVL_INFO)`来设置日志级别。
--- a/Core/Bsp/BSP_Device/spi_st7735s/fonts.c
+++ b/Core/Bsp/BSP_Device/spi_st7735s/fonts.c
@@ -0,0 +1,306 @@
+/* vim: set ai et ts=4 sw=4: */
+#include "fonts.h"
+
+static const uint16_t Font7x10 [] = {
+0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,  // sp
+0x1000, 0x1000, 0x1000, 0x1000, 0x1000, 0x1000, 0x0000, 0x1000, 0x0000, 0x0000,  // !
+0x2800, 0x2800, 0x2800, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,  // "
+0x2400, 0x2400, 0x7C00, 0x2400, 0x4800, 0x7C00, 0x4800, 0x4800, 0x0000, 0x0000,  // #
+0x3800, 0x5400, 0x5000, 0x3800, 0x1400, 0x5400, 0x5400, 0x3800, 0x1000, 0x0000,  // $
+0x2000, 0x5400, 0x5800, 0x3000, 0x2800, 0x5400, 0x1400, 0x0800, 0x0000, 0x0000,  // %
+0x1000, 0x2800, 0x2800, 0x1000, 0x3400, 0x4800, 0x4800, 0x3400, 0x0000, 0x0000,  // &
+0x1000, 0x1000, 0x1000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,  // '
+0x0800, 0x1000, 0x2000, 0x2000, 0x2000, 0x2000, 0x2000, 0x2000, 0x1000, 0x0800,  // (
+0x2000, 0x1000, 0x0800, 0x0800, 0x0800, 0x0800, 0x0800, 0x0800, 0x1000, 0x2000,  // )
+0x1000, 0x3800, 0x1000, 0x2800, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,  // *
+0x0000, 0x0000, 0x1000, 0x1000, 0x7C00, 0x1000, 0x1000, 0x0000, 0x0000, 0x0000,  // +
+0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x1000, 0x1000, 0x1000,  // ,
+0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x3800, 0x0000, 0x0000, 0x0000, 0x0000,  // -
+0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x1000, 0x0000, 0x0000,  // .
+0x0800, 0x0800, 0x1000, 0x1000, 0x1000, 0x1000, 0x2000, 0x2000, 0x0000, 0x0000,  // /
+0x3800, 0x4400, 0x4400, 0x5400, 0x4400, 0x4400, 0x4400, 0x3800, 0x0000, 0x0000,  // 0
+0x1000, 0x3000, 0x5000, 0x1000, 0x1000, 0x1000, 0x1000, 0x1000, 0x0000, 0x0000,  // 1
+0x3800, 0x4400, 0x4400, 0x0400, 0x0800, 0x1000, 0x2000, 0x7C00, 0x0000, 0x0000,  // 2
+0x3800, 0x4400, 0x0400, 0x1800, 0x0400, 0x0400, 0x4400, 0x3800, 0x0000, 0x0000,  // 3
+0x0800, 0x1800, 0x2800, 0x2800, 0x4800, 0x7C00, 0x0800, 0x0800, 0x0000, 0x0000,  // 4
+0x7C00, 0x4000, 0x4000, 0x7800, 0x0400, 0x0400, 0x4400, 0x3800, 0x0000, 0x0000,  // 5
+0x3800, 0x4400, 0x4000, 0x7800, 0x4400, 0x4400, 0x4400, 0x3800, 0x0000, 0x0000,  // 6
+0x7C00, 0x0400, 0x0800, 0x1000, 0x1000, 0x2000, 0x2000, 0x2000, 0x0000, 0x0000,  // 7
+0x3800, 0x4400, 0x4400, 0x3800, 0x4400, 0x4400, 0x4400, 0x3800, 0x0000, 0x0000,  // 8
+0x3800, 0x4400, 0x4400, 0x4400, 0x3C00, 0x0400, 0x4400, 0x3800, 0x0000, 0x0000,  // 9
+0x0000, 0x0000, 0x1000, 0x0000, 0x0000, 0x0000, 0x0000, 0x1000, 0x0000, 0x0000,  // :
+0x0000, 0x0000, 0x0000, 0x1000, 0x0000, 0x0000, 0x0000, 0x1000, 0x1000, 0x1000,  // ;
+0x0000, 0x0000, 0x0C00, 0x3000, 0x4000, 0x3000, 0x0C00, 0x0000, 0x0000, 0x0000,  // <
+0x0000, 0x0000, 0x0000, 0x7C00, 0x0000, 0x7C00, 0x0000, 0x0000, 0x0000, 0x0000,  // =
+0x0000, 0x0000, 0x6000, 0x1800, 0x0400, 0x1800, 0x6000, 0x0000, 0x0000, 0x0000,  // >
+0x3800, 0x4400, 0x0400, 0x0800, 0x1000, 0x1000, 0x0000, 0x1000, 0x0000, 0x0000,  // ?
+0x3800, 0x4400, 0x4C00, 0x5400, 0x5C00, 0x4000, 0x4000, 0x3800, 0x0000, 0x0000,  // @
+0x1000, 0x2800, 0x2800, 0x2800, 0x2800, 0x7C00, 0x4400, 0x4400, 0x0000, 0x0000,  // A
+0x7800, 0x4400, 0x4400, 0x7800, 0x4400, 0x4400, 0x4400, 0x7800, 0x0000, 0x0000,  // B
+0x3800, 0x4400, 0x4000, 0x4000, 0x4000, 0x4000, 0x4400, 0x3800, 0x0000, 0x0000,  // C
+0x7000, 0x4800, 0x4400, 0x4400, 0x4400, 0x4400, 0x4800, 0x7000, 0x0000, 0x0000,  // D
+0x7C00, 0x4000, 0x4000, 0x7C00, 0x4000, 0x4000, 0x4000, 0x7C00, 0x0000, 0x0000,  // E
+0x7C00, 0x4000, 0x4000, 0x7800, 0x4000, 0x4000, 0x4000, 0x4000, 0x0000, 0x0000,  // F
+0x3800, 0x4400, 0x4000, 0x4000, 0x5C00, 0x4400, 0x4400, 0x3800, 0x0000, 0x0000,  // G
+0x4400, 0x4400, 0x4400, 0x7C00, 0x4400, 0x4400, 0x4400, 0x4400, 0x0000, 0x0000,  // H
+0x3800, 0x1000, 0x1000, 0x1000, 0x1000, 0x1000, 0x1000, 0x3800, 0x0000, 0x0000,  // I
+0x0400, 0x0400, 0x0400, 0x0400, 0x0400, 0x0400, 0x4400, 0x3800, 0x0000, 0x0000,  // J
+0x4400, 0x4800, 0x5000, 0x6000, 0x5000, 0x4800, 0x4800, 0x4400, 0x0000, 0x0000,  // K
+0x4000, 0x4000, 0x4000, 0x4000, 0x4000, 0x4000, 0x4000, 0x7C00, 0x0000, 0x0000,  // L
+0x4400, 0x6C00, 0x6C00, 0x5400, 0x4400, 0x4400, 0x4400, 0x4400, 0x0000, 0x0000,  // M
+0x4400, 0x6400, 0x6400, 0x5400, 0x5400, 0x4C00, 0x4C00, 0x4400, 0x0000, 0x0000,  // N
+0x3800, 0x4400, 0x4400, 0x4400, 0x4400, 0x4400, 0x4400, 0x3800, 0x0000, 0x0000,  // O
+0x7800, 0x4400, 0x4400, 0x4400, 0x7800, 0x4000, 0x4000, 0x4000, 0x0000, 0x0000,  // P
+0x3800, 0x4400, 0x4400, 0x4400, 0x4400, 0x4400, 0x5400, 0x3800, 0x0400, 0x0000,  // Q
+0x7800, 0x4400, 0x4400, 0x4400, 0x7800, 0x4800, 0x4800, 0x4400, 0x0000, 0x0000,  // R
+0x3800, 0x4400, 0x4000, 0x3000, 0x0800, 0x0400, 0x4400, 0x3800, 0x0000, 0x0000,  // S
+0x7C00, 0x1000, 0x1000, 0x1000, 0x1000, 0x1000, 0x1000, 0x1000, 0x0000, 0x0000,  // T
+0x4400, 0x4400, 0x4400, 0x4400, 0x4400, 0x4400, 0x4400, 0x3800, 0x0000, 0x0000,  // U
+0x4400, 0x4400, 0x4400, 0x2800, 0x2800, 0x2800, 0x1000, 0x1000, 0x0000, 0x0000,  // V
+0x4400, 0x4400, 0x5400, 0x5400, 0x5400, 0x6C00, 0x2800, 0x2800, 0x0000, 0x0000,  // W
+0x4400, 0x2800, 0x2800, 0x1000, 0x1000, 0x2800, 0x2800, 0x4400, 0x0000, 0x0000,  // X
+0x4400, 0x4400, 0x2800, 0x2800, 0x1000, 0x1000, 0x1000, 0x1000, 0x0000, 0x0000,  // Y
+0x7C00, 0x0400, 0x0800, 0x1000, 0x1000, 0x2000, 0x4000, 0x7C00, 0x0000, 0x0000,  // Z
+0x1800, 0x1000, 0x1000, 0x1000, 0x1000, 0x1000, 0x1000, 0x1000, 0x1000, 0x1800,  // [
+0x2000, 0x2000, 0x1000, 0x1000, 0x1000, 0x1000, 0x0800, 0x0800, 0x0000, 0x0000,  /* \ */
+0x3000, 0x1000, 0x1000, 0x1000, 0x1000, 0x1000, 0x1000, 0x1000, 0x1000, 0x3000,  // ]
+0x1000, 0x2800, 0x2800, 0x4400, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,  // ^
+0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0xFE00,  // _
+0x2000, 0x1000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,  // `
+0x0000, 0x0000, 0x3800, 0x4400, 0x3C00, 0x4400, 0x4C00, 0x3400, 0x0000, 0x0000,  // a
+0x4000, 0x4000, 0x5800, 0x6400, 0x4400, 0x4400, 0x6400, 0x5800, 0x0000, 0x0000,  // b
+0x0000, 0x0000, 0x3800, 0x4400, 0x4000, 0x4000, 0x4400, 0x3800, 0x0000, 0x0000,  // c
+0x0400, 0x0400, 0x3400, 0x4C00, 0x4400, 0x4400, 0x4C00, 0x3400, 0x0000, 0x0000,  // d
+0x0000, 0x0000, 0x3800, 0x4400, 0x7C00, 0x4000, 0x4400, 0x3800, 0x0000, 0x0000,  // e
+0x0C00, 0x1000, 0x7C00, 0x1000, 0x1000, 0x1000, 0x1000, 0x1000, 0x0000, 0x0000,  // f
+0x0000, 0x0000, 0x3400, 0x4C00, 0x4400, 0x4400, 0x4C00, 0x3400, 0x0400, 0x7800,  // g
+0x4000, 0x4000, 0x5800, 0x6400, 0x4400, 0x4400, 0x4400, 0x4400, 0x0000, 0x0000,  // h
+0x1000, 0x0000, 0x7000, 0x1000, 0x1000, 0x1000, 0x1000, 0x1000, 0x0000, 0x0000,  // i
+0x1000, 0x0000, 0x7000, 0x1000, 0x1000, 0x1000, 0x1000, 0x1000, 0x1000, 0xE000,  // j
+0x4000, 0x4000, 0x4800, 0x5000, 0x6000, 0x5000, 0x4800, 0x4400, 0x0000, 0x0000,  // k
+0x7000, 0x1000, 0x1000, 0x1000, 0x1000, 0x1000, 0x1000, 0x1000, 0x0000, 0x0000,  // l
+0x0000, 0x0000, 0x7800, 0x5400, 0x5400, 0x5400, 0x5400, 0x5400, 0x0000, 0x0000,  // m
+0x0000, 0x0000, 0x5800, 0x6400, 0x4400, 0x4400, 0x4400, 0x4400, 0x0000, 0x0000,  // n
+0x0000, 0x0000, 0x3800, 0x4400, 0x4400, 0x4400, 0x4400, 0x3800, 0x0000, 0x0000,  // o
+0x0000, 0x0000, 0x5800, 0x6400, 0x4400, 0x4400, 0x6400, 0x5800, 0x4000, 0x4000,  // p
+0x0000, 0x0000, 0x3400, 0x4C00, 0x4400, 0x4400, 0x4C00, 0x3400, 0x0400, 0x0400,  // q
+0x0000, 0x0000, 0x5800, 0x6400, 0x4000, 0x4000, 0x4000, 0x4000, 0x0000, 0x0000,  // r
+0x0000, 0x0000, 0x3800, 0x4400, 0x3000, 0x0800, 0x4400, 0x3800, 0x0000, 0x0000,  // s
+0x2000, 0x2000, 0x7800, 0x2000, 0x2000, 0x2000, 0x2000, 0x1800, 0x0000, 0x0000,  // t
+0x0000, 0x0000, 0x4400, 0x4400, 0x4400, 0x4400, 0x4C00, 0x3400, 0x0000, 0x0000,  // u
+0x0000, 0x0000, 0x4400, 0x4400, 0x2800, 0x2800, 0x2800, 0x1000, 0x0000, 0x0000,  // v
+0x0000, 0x0000, 0x5400, 0x5400, 0x5400, 0x6C00, 0x2800, 0x2800, 0x0000, 0x0000,  // w
+0x0000, 0x0000, 0x4400, 0x2800, 0x1000, 0x1000, 0x2800, 0x4400, 0x0000, 0x0000,  // x
+0x0000, 0x0000, 0x4400, 0x4400, 0x2800, 0x2800, 0x1000, 0x1000, 0x1000, 0x6000,  // y
+0x0000, 0x0000, 0x7C00, 0x0800, 0x1000, 0x2000, 0x4000, 0x7C00, 0x0000, 0x0000,  // z
+0x1800, 0x1000, 0x1000, 0x1000, 0x2000, 0x2000, 0x1000, 0x1000, 0x1000, 0x1800,  // {
+0x1000, 0x1000, 0x1000, 0x1000, 0x1000, 0x1000, 0x1000, 0x1000, 0x1000, 0x1000,  // |
+0x3000, 0x1000, 0x1000, 0x1000, 0x0800, 0x0800, 0x1000, 0x1000, 0x1000, 0x3000,  // }
+0x0000, 0x0000, 0x0000, 0x7400, 0x4C00, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,  // ~
+};
+
+static const uint16_t Font11x18 [] = {
+0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,   // sp
+0x0000, 0x0C00, 0x0C00, 0x0C00, 0x0C00, 0x0C00, 0x0C00, 0x0C00, 0x0C00, 0x0C00, 0x0C00, 0x0C00, 0x0000, 0x0C00, 0x0C00, 0x0000, 0x0000, 0x0000,   // !
+0x0000, 0x1B00, 0x1B00, 0x1B00, 0x1B00, 0x1B00, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,   // "
+0x0000, 0x1980, 0x1980, 0x1980, 0x1980, 0x7FC0, 0x7FC0, 0x1980, 0x3300, 0x7FC0, 0x7FC0, 0x3300, 0x3300, 0x3300, 0x3300, 0x0000, 0x0000, 0x0000,   // #
+0x0000, 0x1E00, 0x3F00, 0x7580, 0x6580, 0x7400, 0x3C00, 0x1E00, 0x0700, 0x0580, 0x6580, 0x6580, 0x7580, 0x3F00, 0x1E00, 0x0400, 0x0400, 0x0000,   // $
+0x0000, 0x7000, 0xD800, 0xD840, 0xD8C0, 0xD980, 0x7300, 0x0600, 0x0C00, 0x1B80, 0x36C0, 0x66C0, 0x46C0, 0x06C0, 0x0380, 0x0000, 0x0000, 0x0000,   // %
+0x0000, 0x1E00, 0x3F00, 0x3300, 0x3300, 0x3300, 0x1E00, 0x0C00, 0x3CC0, 0x66C0, 0x6380, 0x6180, 0x6380, 0x3EC0, 0x1C80, 0x0000, 0x0000, 0x0000,   // &
+0x0000, 0x0C00, 0x0C00, 0x0C00, 0x0C00, 0x0C00, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,   // '
+0x0080, 0x0100, 0x0300, 0x0600, 0x0600, 0x0400, 0x0C00, 0x0C00, 0x0C00, 0x0C00, 0x0C00, 0x0C00, 0x0400, 0x0600, 0x0600, 0x0300, 0x0100, 0x0080,   // (
+0x2000, 0x1000, 0x1800, 0x0C00, 0x0C00, 0x0400, 0x0600, 0x0600, 0x0600, 0x0600, 0x0600, 0x0600, 0x0400, 0x0C00, 0x0C00, 0x1800, 0x1000, 0x2000,   // )
+0x0000, 0x0C00, 0x2D00, 0x3F00, 0x1E00, 0x3300, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,   // *
+0x0000, 0x0000, 0x0000, 0x0C00, 0x0C00, 0x0C00, 0x0C00, 0xFFC0, 0xFFC0, 0x0C00, 0x0C00, 0x0C00, 0x0C00, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,   // +
+0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0C00, 0x0C00, 0x0400, 0x0400, 0x0800,   // ,
+0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x1E00, 0x1E00, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,   // -
+0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0C00, 0x0C00, 0x0000, 0x0000, 0x0000,   // .
+0x0000, 0x0300, 0x0300, 0x0300, 0x0600, 0x0600, 0x0600, 0x0600, 0x0C00, 0x0C00, 0x0C00, 0x0C00, 0x1800, 0x1800, 0x1800, 0x0000, 0x0000, 0x0000,   // /
+0x0000, 0x1E00, 0x3F00, 0x3300, 0x6180, 0x6180, 0x6180, 0x6D80, 0x6D80, 0x6180, 0x6180, 0x6180, 0x3300, 0x3F00, 0x1E00, 0x0000, 0x0000, 0x0000,   // 0
+0x0000, 0x0600, 0x0E00, 0x1E00, 0x3600, 0x2600, 0x0600, 0x0600, 0x0600, 0x0600, 0x0600, 0x0600, 0x0600, 0x0600, 0x0600, 0x0000, 0x0000, 0x0000,   // 1
+0x0000, 0x1E00, 0x3F00, 0x7380, 0x6180, 0x6180, 0x0180, 0x0300, 0x0600, 0x0C00, 0x1800, 0x3000, 0x6000, 0x7F80, 0x7F80, 0x0000, 0x0000, 0x0000,   // 2
+0x0000, 0x1C00, 0x3E00, 0x6300, 0x6300, 0x0300, 0x0E00, 0x0E00, 0x0300, 0x0180, 0x0180, 0x6180, 0x7380, 0x3F00, 0x1E00, 0x0000, 0x0000, 0x0000,   // 3
+0x0000, 0x0600, 0x0E00, 0x0E00, 0x1E00, 0x1E00, 0x1600, 0x3600, 0x3600, 0x6600, 0x7F80, 0x7F80, 0x0600, 0x0600, 0x0600, 0x0000, 0x0000, 0x0000,   // 4
+0x0000, 0x7F00, 0x7F00, 0x6000, 0x6000, 0x6000, 0x6E00, 0x7F00, 0x6380, 0x0180, 0x0180, 0x6180, 0x7380, 0x3F00, 0x1E00, 0x0000, 0x0000, 0x0000,   // 5
+0x0000, 0x1E00, 0x3F00, 0x3380, 0x6180, 0x6000, 0x6E00, 0x7F00, 0x7380, 0x6180, 0x6180, 0x6180, 0x3380, 0x3F00, 0x1E00, 0x0000, 0x0000, 0x0000,   // 6
+0x0000, 0x7F80, 0x7F80, 0x0180, 0x0300, 0x0300, 0x0600, 0x0600, 0x0C00, 0x0C00, 0x0C00, 0x0800, 0x1800, 0x1800, 0x1800, 0x0000, 0x0000, 0x0000,   // 7
+0x0000, 0x1E00, 0x3F00, 0x6380, 0x6180, 0x6180, 0x2100, 0x1E00, 0x3F00, 0x6180, 0x6180, 0x6180, 0x6180, 0x3F00, 0x1E00, 0x0000, 0x0000, 0x0000,   // 8
+0x0000, 0x1E00, 0x3F00, 0x7300, 0x6180, 0x6180, 0x6180, 0x7380, 0x3F80, 0x1D80, 0x0180, 0x6180, 0x7300, 0x3F00, 0x1E00, 0x0000, 0x0000, 0x0000,   // 9
+0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0C00, 0x0C00, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0C00, 0x0C00, 0x0000, 0x0000, 0x0000,   // :
+0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0C00, 0x0C00, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0C00, 0x0C00, 0x0400, 0x0400, 0x0800,   // ;
+0x0000, 0x0000, 0x0000, 0x0000, 0x0080, 0x0380, 0x0E00, 0x3800, 0x6000, 0x3800, 0x0E00, 0x0380, 0x0080, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,   // <
+0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x7F80, 0x7F80, 0x0000, 0x0000, 0x7F80, 0x7F80, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,   // =
+0x0000, 0x0000, 0x0000, 0x0000, 0x4000, 0x7000, 0x1C00, 0x0700, 0x0180, 0x0700, 0x1C00, 0x7000, 0x4000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,   // >
+0x0000, 0x1F00, 0x3F80, 0x71C0, 0x60C0, 0x00C0, 0x01C0, 0x0380, 0x0700, 0x0E00, 0x0C00, 0x0C00, 0x0000, 0x0C00, 0x0C00, 0x0000, 0x0000, 0x0000,   // ?
+0x0000, 0x1E00, 0x3F00, 0x3180, 0x7180, 0x6380, 0x6F80, 0x6D80, 0x6D80, 0x6F80, 0x6780, 0x6000, 0x3200, 0x3E00, 0x1C00, 0x0000, 0x0000, 0x0000,   // @
+0x0000, 0x0E00, 0x0E00, 0x1B00, 0x1B00, 0x1B00, 0x1B00, 0x3180, 0x3180, 0x3F80, 0x3F80, 0x3180, 0x60C0, 0x60C0, 0x60C0, 0x0000, 0x0000, 0x0000,   // A
+0x0000, 0x7C00, 0x7E00, 0x6300, 0x6300, 0x6300, 0x6300, 0x7E00, 0x7E00, 0x6300, 0x6180, 0x6180, 0x6380, 0x7F00, 0x7E00, 0x0000, 0x0000, 0x0000,   // B
+0x0000, 0x1E00, 0x3F00, 0x3180, 0x6180, 0x6000, 0x6000, 0x6000, 0x6000, 0x6000, 0x6000, 0x6180, 0x3180, 0x3F00, 0x1E00, 0x0000, 0x0000, 0x0000,   // C
+0x0000, 0x7C00, 0x7F00, 0x6300, 0x6380, 0x6180, 0x6180, 0x6180, 0x6180, 0x6180, 0x6180, 0x6300, 0x6300, 0x7E00, 0x7C00, 0x0000, 0x0000, 0x0000,   // D
+0x0000, 0x7F80, 0x7F80, 0x6000, 0x6000, 0x6000, 0x6000, 0x7F00, 0x7F00, 0x6000, 0x6000, 0x6000, 0x6000, 0x7F80, 0x7F80, 0x0000, 0x0000, 0x0000,   // E
+0x0000, 0x7F80, 0x7F80, 0x6000, 0x6000, 0x6000, 0x6000, 0x7F00, 0x7F00, 0x6000, 0x6000, 0x6000, 0x6000, 0x6000, 0x6000, 0x0000, 0x0000, 0x0000,   // F
+0x0000, 0x1E00, 0x3F00, 0x3180, 0x6180, 0x6000, 0x6000, 0x6000, 0x6380, 0x6380, 0x6180, 0x6180, 0x3180, 0x3F80, 0x1E00, 0x0000, 0x0000, 0x0000,   // G
+0x0000, 0x6180, 0x6180, 0x6180, 0x6180, 0x6180, 0x6180, 0x7F80, 0x7F80, 0x6180, 0x6180, 0x6180, 0x6180, 0x6180, 0x6180, 0x0000, 0x0000, 0x0000,   // H
+0x0000, 0x3F00, 0x3F00, 0x0C00, 0x0C00, 0x0C00, 0x0C00, 0x0C00, 0x0C00, 0x0C00, 0x0C00, 0x0C00, 0x0C00, 0x3F00, 0x3F00, 0x0000, 0x0000, 0x0000,   // I
+0x0000, 0x0180, 0x0180, 0x0180, 0x0180, 0x0180, 0x0180, 0x0180, 0x0180, 0x0180, 0x6180, 0x6180, 0x7380, 0x3F00, 0x1E00, 0x0000, 0x0000, 0x0000,   // J
+0x0000, 0x60C0, 0x6180, 0x6300, 0x6600, 0x6600, 0x6C00, 0x7800, 0x7C00, 0x6600, 0x6600, 0x6300, 0x6180, 0x6180, 0x60C0, 0x0000, 0x0000, 0x0000,   // K
+0x0000, 0x6000, 0x6000, 0x6000, 0x6000, 0x6000, 0x6000, 0x6000, 0x6000, 0x6000, 0x6000, 0x6000, 0x6000, 0x7F80, 0x7F80, 0x0000, 0x0000, 0x0000,   // L
+0x0000, 0x71C0, 0x71C0, 0x7BC0, 0x7AC0, 0x6AC0, 0x6AC0, 0x6EC0, 0x64C0, 0x60C0, 0x60C0, 0x60C0, 0x60C0, 0x60C0, 0x60C0, 0x0000, 0x0000, 0x0000,   // M
+0x0000, 0x7180, 0x7180, 0x7980, 0x7980, 0x7980, 0x6D80, 0x6D80, 0x6D80, 0x6580, 0x6780, 0x6780, 0x6780, 0x6380, 0x6380, 0x0000, 0x0000, 0x0000,   // N
+0x0000, 0x1E00, 0x3F00, 0x3300, 0x6180, 0x6180, 0x6180, 0x6180, 0x6180, 0x6180, 0x6180, 0x6180, 0x3300, 0x3F00, 0x1E00, 0x0000, 0x0000, 0x0000,   // O
+0x0000, 0x7E00, 0x7F00, 0x6380, 0x6180, 0x6180, 0x6180, 0x6380, 0x7F00, 0x7E00, 0x6000, 0x6000, 0x6000, 0x6000, 0x6000, 0x0000, 0x0000, 0x0000,   // P
+0x0000, 0x1E00, 0x3F00, 0x3300, 0x6180, 0x6180, 0x6180, 0x6180, 0x6180, 0x6180, 0x6580, 0x6780, 0x3300, 0x3F80, 0x1E40, 0x0000, 0x0000, 0x0000,   // Q
+0x0000, 0x7E00, 0x7F00, 0x6380, 0x6180, 0x6180, 0x6380, 0x7F00, 0x7E00, 0x6600, 0x6300, 0x6300, 0x6180, 0x6180, 0x60C0, 0x0000, 0x0000, 0x0000,   // R
+0x0000, 0x0E00, 0x1F00, 0x3180, 0x3180, 0x3000, 0x3800, 0x1E00, 0x0700, 0x0380, 0x6180, 0x6180, 0x3180, 0x3F00, 0x1E00, 0x0000, 0x0000, 0x0000,   // S
+0x0000, 0xFFC0, 0xFFC0, 0x0C00, 0x0C00, 0x0C00, 0x0C00, 0x0C00, 0x0C00, 0x0C00, 0x0C00, 0x0C00, 0x0C00, 0x0C00, 0x0C00, 0x0000, 0x0000, 0x0000,   // T
+0x0000, 0x6180, 0x6180, 0x6180, 0x6180, 0x6180, 0x6180, 0x6180, 0x6180, 0x6180, 0x6180, 0x6180, 0x7380, 0x3F00, 0x1E00, 0x0000, 0x0000, 0x0000,   // U
+0x0000, 0x60C0, 0x60C0, 0x60C0, 0x3180, 0x3180, 0x3180, 0x1B00, 0x1B00, 0x1B00, 0x1B00, 0x0E00, 0x0E00, 0x0E00, 0x0400, 0x0000, 0x0000, 0x0000,   // V
+0x0000, 0xC0C0, 0xC0C0, 0xC0C0, 0xC0C0, 0xC0C0, 0xCCC0, 0x4C80, 0x4C80, 0x5E80, 0x5280, 0x5280, 0x7380, 0x6180, 0x6180, 0x0000, 0x0000, 0x0000,   // W
+0x0000, 0xC0C0, 0x6080, 0x6180, 0x3300, 0x3B00, 0x1E00, 0x0C00, 0x0C00, 0x1E00, 0x1F00, 0x3B00, 0x7180, 0x6180, 0xC0C0, 0x0000, 0x0000, 0x0000,   // X
+0x0000, 0xC0C0, 0x6180, 0x6180, 0x3300, 0x3300, 0x1E00, 0x1E00, 0x0C00, 0x0C00, 0x0C00, 0x0C00, 0x0C00, 0x0C00, 0x0C00, 0x0000, 0x0000, 0x0000,   // Y
+0x0000, 0x3F80, 0x3F80, 0x0180, 0x0300, 0x0300, 0x0600, 0x0C00, 0x0C00, 0x1800, 0x1800, 0x3000, 0x6000, 0x7F80, 0x7F80, 0x0000, 0x0000, 0x0000,   // Z
+0x0F00, 0x0F00, 0x0C00, 0x0C00, 0x0C00, 0x0C00, 0x0C00, 0x0C00, 0x0C00, 0x0C00, 0x0C00, 0x0C00, 0x0C00, 0x0C00, 0x0C00, 0x0C00, 0x0F00, 0x0F00,   // [
+0x0000, 0x1800, 0x1800, 0x1800, 0x0C00, 0x0C00, 0x0C00, 0x0C00, 0x0600, 0x0600, 0x0600, 0x0600, 0x0300, 0x0300, 0x0300, 0x0000, 0x0000, 0x0000,   /* \ */
+0x1E00, 0x1E00, 0x0600, 0x0600, 0x0600, 0x0600, 0x0600, 0x0600, 0x0600, 0x0600, 0x0600, 0x0600, 0x0600, 0x0600, 0x0600, 0x0600, 0x1E00, 0x1E00,   // ]
+0x0000, 0x0C00, 0x0C00, 0x1E00, 0x1200, 0x3300, 0x3300, 0x6180, 0x6180, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,   // ^
+0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0xFFE0, 0x0000,   // _
+0x0000, 0x3800, 0x1800, 0x0C00, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,   // `
+0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x1F00, 0x3F80, 0x6180, 0x0180, 0x1F80, 0x3F80, 0x6180, 0x6380, 0x7F80, 0x38C0, 0x0000, 0x0000, 0x0000,   // a
+0x0000, 0x6000, 0x6000, 0x6000, 0x6000, 0x6E00, 0x7F00, 0x7380, 0x6180, 0x6180, 0x6180, 0x6180, 0x7380, 0x7F00, 0x6E00, 0x0000, 0x0000, 0x0000,   // b
+0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x1E00, 0x3F00, 0x7380, 0x6180, 0x6000, 0x6000, 0x6180, 0x7380, 0x3F00, 0x1E00, 0x0000, 0x0000, 0x0000,   // c
+0x0000, 0x0180, 0x0180, 0x0180, 0x0180, 0x1D80, 0x3F80, 0x7380, 0x6180, 0x6180, 0x6180, 0x6180, 0x7380, 0x3F80, 0x1D80, 0x0000, 0x0000, 0x0000,   // d
+0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x1E00, 0x3F00, 0x7300, 0x6180, 0x7F80, 0x7F80, 0x6000, 0x7180, 0x3F00, 0x1E00, 0x0000, 0x0000, 0x0000,   // e
+0x0000, 0x07C0, 0x0FC0, 0x0C00, 0x0C00, 0x7F80, 0x7F80, 0x0C00, 0x0C00, 0x0C00, 0x0C00, 0x0C00, 0x0C00, 0x0C00, 0x0C00, 0x0000, 0x0000, 0x0000,   // f
+0x0000, 0x0000, 0x0000, 0x0000, 0x1D80, 0x3F80, 0x7380, 0x6180, 0x6180, 0x6180, 0x6180, 0x7380, 0x3F80, 0x1D80, 0x0180, 0x6380, 0x7F00, 0x3E00,   // g
+0x0000, 0x6000, 0x6000, 0x6000, 0x6000, 0x6F00, 0x7F80, 0x7180, 0x6180, 0x6180, 0x6180, 0x6180, 0x6180, 0x6180, 0x6180, 0x0000, 0x0000, 0x0000,   // h
+0x0000, 0x0600, 0x0600, 0x0000, 0x0000, 0x3E00, 0x3E00, 0x0600, 0x0600, 0x0600, 0x0600, 0x0600, 0x0600, 0x0600, 0x0600, 0x0000, 0x0000, 0x0000,   // i
+0x0600, 0x0600, 0x0000, 0x0000, 0x3E00, 0x3E00, 0x0600, 0x0600, 0x0600, 0x0600, 0x0600, 0x0600, 0x0600, 0x0600, 0x0600, 0x4600, 0x7E00, 0x3C00,   // j
+0x0000, 0x6000, 0x6000, 0x6000, 0x6000, 0x6180, 0x6300, 0x6600, 0x6C00, 0x7C00, 0x7600, 0x6300, 0x6300, 0x6180, 0x60C0, 0x0000, 0x0000, 0x0000,   // k
+0x0000, 0x3E00, 0x3E00, 0x0600, 0x0600, 0x0600, 0x0600, 0x0600, 0x0600, 0x0600, 0x0600, 0x0600, 0x0600, 0x0600, 0x0600, 0x0000, 0x0000, 0x0000,   // l
+0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0xDD80, 0xFFC0, 0xCEC0, 0xCCC0, 0xCCC0, 0xCCC0, 0xCCC0, 0xCCC0, 0xCCC0, 0xCCC0, 0x0000, 0x0000, 0x0000,   // m
+0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x6F00, 0x7F80, 0x7180, 0x6180, 0x6180, 0x6180, 0x6180, 0x6180, 0x6180, 0x6180, 0x0000, 0x0000, 0x0000,   // n
+0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x1E00, 0x3F00, 0x7380, 0x6180, 0x6180, 0x6180, 0x6180, 0x7380, 0x3F00, 0x1E00, 0x0000, 0x0000, 0x0000,   // o
+0x0000, 0x0000, 0x0000, 0x0000, 0x6E00, 0x7F00, 0x7380, 0x6180, 0x6180, 0x6180, 0x6180, 0x7380, 0x7F00, 0x6E00, 0x6000, 0x6000, 0x6000, 0x6000,   // p
+0x0000, 0x0000, 0x0000, 0x0000, 0x1D80, 0x3F80, 0x7380, 0x6180, 0x6180, 0x6180, 0x6180, 0x7380, 0x3F80, 0x1D80, 0x0180, 0x0180, 0x0180, 0x0180,   // q
+0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x6700, 0x3F80, 0x3900, 0x3000, 0x3000, 0x3000, 0x3000, 0x3000, 0x3000, 0x3000, 0x0000, 0x0000, 0x0000,   // r
+0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x1E00, 0x3F80, 0x6180, 0x6000, 0x7F00, 0x3F80, 0x0180, 0x6180, 0x7F00, 0x1E00, 0x0000, 0x0000, 0x0000,   // s
+0x0000, 0x0000, 0x0800, 0x1800, 0x1800, 0x7F00, 0x7F00, 0x1800, 0x1800, 0x1800, 0x1800, 0x1800, 0x1800, 0x1F80, 0x0F80, 0x0000, 0x0000, 0x0000,   // t
+0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x6180, 0x6180, 0x6180, 0x6180, 0x6180, 0x6180, 0x6180, 0x6380, 0x7F80, 0x3D80, 0x0000, 0x0000, 0x0000,   // u
+0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x60C0, 0x3180, 0x3180, 0x3180, 0x1B00, 0x1B00, 0x1B00, 0x0E00, 0x0E00, 0x0600, 0x0000, 0x0000, 0x0000,   // v
+0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0xDD80, 0xDD80, 0xDD80, 0x5500, 0x5500, 0x5500, 0x7700, 0x7700, 0x2200, 0x2200, 0x0000, 0x0000, 0x0000,   // w
+0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x6180, 0x3300, 0x3300, 0x1E00, 0x0C00, 0x0C00, 0x1E00, 0x3300, 0x3300, 0x6180, 0x0000, 0x0000, 0x0000,   // x
+0x0000, 0x0000, 0x0000, 0x0000, 0x6180, 0x6180, 0x3180, 0x3300, 0x3300, 0x1B00, 0x1B00, 0x1B00, 0x0E00, 0x0E00, 0x0E00, 0x1C00, 0x7C00, 0x7000,   // y
+0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x7FC0, 0x7FC0, 0x0180, 0x0300, 0x0600, 0x0C00, 0x1800, 0x3000, 0x7FC0, 0x7FC0, 0x0000, 0x0000, 0x0000,   // z
+0x0380, 0x0780, 0x0600, 0x0600, 0x0600, 0x0600, 0x0600, 0x0E00, 0x1C00, 0x1C00, 0x0E00, 0x0600, 0x0600, 0x0600, 0x0600, 0x0600, 0x0780, 0x0380,   // {
+0x0600, 0x0600, 0x0600, 0x0600, 0x0600, 0x0600, 0x0600, 0x0600, 0x0600, 0x0600, 0x0600, 0x0600, 0x0600, 0x0600, 0x0600, 0x0600, 0x0600, 0x0600,   // |
+0x3800, 0x3C00, 0x0C00, 0x0C00, 0x0C00, 0x0C00, 0x0C00, 0x0E00, 0x0700, 0x0700, 0x0E00, 0x0C00, 0x0C00, 0x0C00, 0x0C00, 0x0C00, 0x3C00, 0x3800,   // }
+0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x3880, 0x7F80, 0x4700, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,   // ~
+};
+
+static const uint16_t Font16x26 [] = {
+0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000, // Ascii = [ ]
+0x03E0,0x03E0,0x03E0,0x03E0,0x03E0,0x03E0,0x03E0,0x03E0,0x03C0,0x03C0,0x01C0,0x01C0,0x01C0,0x01C0,0x01C0,0x0000,0x0000,0x0000,0x03E0,0x03E0,0x03E0,0x0000,0x0000,0x0000,0x0000,0x0000, // Ascii = [!]
+0x1E3C,0x1E3C,0x1E3C,0x1E3C,0x1E3C,0x1E3C,0x1E3C,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000, // Ascii = ["]
+0x01CE,0x03CE,0x03DE,0x039E,0x039C,0x079C,0x3FFF,0x7FFF,0x0738,0x0F38,0x0F78,0x0F78,0x0E78,0xFFFF,0xFFFF,0x1EF0,0x1CF0,0x1CE0,0x3CE0,0x3DE0,0x39E0,0x0000,0x0000,0x0000,0x0000,0x0000, // Ascii = [#]
+0x03FC,0x0FFE,0x1FEE,0x1EE0,0x1EE0,0x1EE0,0x1EE0,0x1FE0,0x0FE0,0x07E0,0x03F0,0x01FC,0x01FE,0x01FE,0x01FE,0x01FE,0x01FE,0x01FE,0x3DFE,0x3FFC,0x0FF0,0x01E0,0x01E0,0x0000,0x0000,0x0000, // Ascii = [$]
+0x3E03,0xF707,0xE78F,0xE78E,0xE39E,0xE3BC,0xE7B8,0xE7F8,0xF7F0,0x3FE0,0x01C0,0x03FF,0x07FF,0x07F3,0x0FF3,0x1EF3,0x3CF3,0x38F3,0x78F3,0xF07F,0xE03F,0x0000,0x0000,0x0000,0x0000,0x0000, // Ascii = [%]
+0x07E0,0x0FF8,0x0F78,0x1F78,0x1F78,0x1F78,0x0F78,0x0FF0,0x0FE0,0x1F80,0x7FC3,0xFBC3,0xF3E7,0xF1F7,0xF0F7,0xF0FF,0xF07F,0xF83E,0x7C7F,0x3FFF,0x1FEF,0x0000,0x0000,0x0000,0x0000,0x0000, // Ascii = [&]
+0x03E0,0x03E0,0x03E0,0x03E0,0x03E0,0x03C0,0x01C0,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000, // Ascii = [']
+0x003F,0x007C,0x01F0,0x01E0,0x03C0,0x07C0,0x0780,0x0780,0x0F80,0x0F00,0x0F00,0x0F00,0x0F00,0x0F00,0x0F00,0x0F80,0x0780,0x0780,0x07C0,0x03C0,0x01E0,0x01F0,0x007C,0x003F,0x000F,0x0000, // Ascii = [(]
+0x7E00,0x1F00,0x07C0,0x03C0,0x01E0,0x01F0,0x00F0,0x00F0,0x00F8,0x0078,0x0078,0x0078,0x0078,0x0078,0x0078,0x00F8,0x00F0,0x00F0,0x01F0,0x01E0,0x03C0,0x07C0,0x1F00,0x7E00,0x7800,0x0000, // Ascii = [)]
+0x03E0,0x03C0,0x01C0,0x39CE,0x3FFF,0x3F7F,0x0320,0x0370,0x07F8,0x0F78,0x1F3C,0x0638,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000, // Ascii = [*]
+0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x01C0,0x01C0,0x01C0,0x01C0,0x01C0,0x01C0,0x01C0,0xFFFF,0xFFFF,0x01C0,0x01C0,0x01C0,0x01C0,0x01C0,0x01C0,0x0000,0x0000,0x0000,0x0000,0x0000, // Ascii = [+]
+0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x03E0,0x03E0,0x03E0,0x03E0,0x01E0,0x01E0,0x01E0,0x01C0,0x0380, // Ascii = [,]
+0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x3FFE,0x3FFE,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000, // Ascii = [-]
+0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x03E0,0x03E0,0x03E0,0x03E0,0x0000,0x0000,0x0000,0x0000,0x0000, // Ascii = [.]
+0x000F,0x000F,0x001E,0x001E,0x003C,0x003C,0x0078,0x0078,0x00F0,0x00F0,0x01E0,0x01E0,0x03C0,0x03C0,0x0780,0x0780,0x0F00,0x0F00,0x1E00,0x1E00,0x3C00,0x3C00,0x7800,0x7800,0xF000,0x0000, // Ascii = [/]
+0x07F0,0x0FF8,0x1F7C,0x3E3E,0x3C1E,0x7C1F,0x7C1F,0x780F,0x780F,0x780F,0x780F,0x780F,0x780F,0x780F,0x7C1F,0x7C1F,0x3C1E,0x3E3E,0x1F7C,0x0FF8,0x07F0,0x0000,0x0000,0x0000,0x0000,0x0000, // Ascii = [0]
+0x00F0,0x07F0,0x3FF0,0x3FF0,0x01F0,0x01F0,0x01F0,0x01F0,0x01F0,0x01F0,0x01F0,0x01F0,0x01F0,0x01F0,0x01F0,0x01F0,0x01F0,0x01F0,0x01F0,0x3FFF,0x3FFF,0x0000,0x0000,0x0000,0x0000,0x0000, // Ascii = [1]
+0x0FE0,0x3FF8,0x3C7C,0x003C,0x003E,0x003E,0x003E,0x003C,0x003C,0x007C,0x00F8,0x01F0,0x03E0,0x07C0,0x0780,0x0F00,0x1E00,0x3E00,0x3C00,0x3FFE,0x3FFE,0x0000,0x0000,0x0000,0x0000,0x0000, // Ascii = [2]
+0x0FF0,0x1FF8,0x1C7C,0x003E,0x003E,0x003E,0x003C,0x003C,0x00F8,0x0FF0,0x0FF8,0x007C,0x003E,0x001E,0x001E,0x001E,0x001E,0x003E,0x1C7C,0x1FF8,0x1FE0,0x0000,0x0000,0x0000,0x0000,0x0000, // Ascii = [3]
+0x0078,0x00F8,0x00F8,0x01F8,0x03F8,0x07F8,0x07F8,0x0F78,0x1E78,0x1E78,0x3C78,0x7878,0x7878,0xFFFF,0xFFFF,0x0078,0x0078,0x0078,0x0078,0x0078,0x0078,0x0000,0x0000,0x0000,0x0000,0x0000, // Ascii = [4]
+0x1FFC,0x1FFC,0x1FFC,0x1E00,0x1E00,0x1E00,0x1E00,0x1E00,0x1FE0,0x1FF8,0x00FC,0x007C,0x003E,0x003E,0x001E,0x003E,0x003E,0x003C,0x1C7C,0x1FF8,0x1FE0,0x0000,0x0000,0x0000,0x0000,0x0000, // Ascii = [5]
+0x01FC,0x07FE,0x0F8E,0x1F00,0x1E00,0x3E00,0x3C00,0x3C00,0x3DF8,0x3FFC,0x7F3E,0x7E1F,0x3C0F,0x3C0F,0x3C0F,0x3C0F,0x3E0F,0x1E1F,0x1F3E,0x0FFC,0x03F0,0x0000,0x0000,0x0000,0x0000,0x0000, // Ascii = [6]
+0x3FFF,0x3FFF,0x3FFF,0x000F,0x001E,0x001E,0x003C,0x0038,0x0078,0x00F0,0x00F0,0x01E0,0x01E0,0x03C0,0x03C0,0x0780,0x0F80,0x0F80,0x0F00,0x1F00,0x1F00,0x0000,0x0000,0x0000,0x0000,0x0000, // Ascii = [7]
+0x07F8,0x0FFC,0x1F3E,0x1E1E,0x3E1E,0x3E1E,0x1E1E,0x1F3C,0x0FF8,0x07F0,0x0FF8,0x1EFC,0x3E3E,0x3C1F,0x7C1F,0x7C0F,0x7C0F,0x3C1F,0x3F3E,0x1FFC,0x07F0,0x0000,0x0000,0x0000,0x0000,0x0000, // Ascii = [8]
+0x07F0,0x0FF8,0x1E7C,0x3C3E,0x3C1E,0x7C1F,0x7C1F,0x7C1F,0x7C1F,0x3C1F,0x3E3F,0x1FFF,0x07EF,0x001F,0x001E,0x001E,0x003E,0x003C,0x38F8,0x3FF0,0x1FE0,0x0000,0x0000,0x0000,0x0000,0x0000, // Ascii = [9]
+0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x03E0,0x03E0,0x03E0,0x03E0,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x03E0,0x03E0,0x03E0,0x03E0,0x0000,0x0000,0x0000,0x0000,0x0000, // Ascii = [:]
+0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x03E0,0x03E0,0x03E0,0x03E0,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x03E0,0x03E0,0x03E0,0x03E0,0x01E0,0x01E0,0x01E0,0x03C0,0x0380, // Ascii = [;]
+0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0003,0x000F,0x003F,0x00FC,0x03F0,0x0FC0,0x3F00,0xFE00,0x3F00,0x0FC0,0x03F0,0x00FC,0x003F,0x000F,0x0003,0x0000,0x0000,0x0000,0x0000,0x0000, // Ascii = [<]
+0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0xFFFF,0xFFFF,0x0000,0x0000,0x0000,0xFFFF,0xFFFF,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000, // Ascii = [=]
+0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0xE000,0xF800,0x7E00,0x1F80,0x07E0,0x01F8,0x007E,0x001F,0x007E,0x01F8,0x07E0,0x1F80,0x7E00,0xF800,0xE000,0x0000,0x0000,0x0000,0x0000,0x0000, // Ascii = [>]
+0x1FF0,0x3FFC,0x383E,0x381F,0x381F,0x001E,0x001E,0x003C,0x0078,0x00F0,0x01E0,0x03C0,0x03C0,0x07C0,0x07C0,0x0000,0x0000,0x0000,0x07C0,0x07C0,0x07C0,0x0000,0x0000,0x0000,0x0000,0x0000, // Ascii = [?]
+0x03F8,0x0FFE,0x1F1E,0x3E0F,0x3C7F,0x78FF,0x79EF,0x73C7,0xF3C7,0xF38F,0xF38F,0xF38F,0xF39F,0xF39F,0x73FF,0x7BFF,0x79F7,0x3C00,0x1F1C,0x0FFC,0x03F8,0x0000,0x0000,0x0000,0x0000,0x0000, // Ascii = [@]
+0x0000,0x0000,0x0000,0x03E0,0x03E0,0x07F0,0x07F0,0x07F0,0x0F78,0x0F78,0x0E7C,0x1E3C,0x1E3C,0x3C3E,0x3FFE,0x3FFF,0x781F,0x780F,0xF00F,0xF007,0xF007,0x0000,0x0000,0x0000,0x0000,0x0000, // Ascii = [A]
+0x0000,0x0000,0x0000,0x3FF8,0x3FFC,0x3C3E,0x3C1E,0x3C1E,0x3C1E,0x3C3E,0x3C7C,0x3FF0,0x3FF8,0x3C7E,0x3C1F,0x3C1F,0x3C0F,0x3C0F,0x3C1F,0x3FFE,0x3FF8,0x0000,0x0000,0x0000,0x0000,0x0000, // Ascii = [B]
+0x0000,0x0000,0x0000,0x01FF,0x07FF,0x1F87,0x3E00,0x3C00,0x7C00,0x7800,0x7800,0x7800,0x7800,0x7800,0x7C00,0x7C00,0x3E00,0x3F00,0x1F83,0x07FF,0x01FF,0x0000,0x0000,0x0000,0x0000,0x0000, // Ascii = [C]
+0x0000,0x0000,0x0000,0x7FF0,0x7FFC,0x787E,0x781F,0x781F,0x780F,0x780F,0x780F,0x780F,0x780F,0x780F,0x780F,0x780F,0x781F,0x781E,0x787E,0x7FF8,0x7FE0,0x0000,0x0000,0x0000,0x0000,0x0000, // Ascii = [D]
+0x0000,0x0000,0x0000,0x3FFF,0x3FFF,0x3E00,0x3E00,0x3E00,0x3E00,0x3E00,0x3E00,0x3FFE,0x3FFE,0x3E00,0x3E00,0x3E00,0x3E00,0x3E00,0x3E00,0x3FFF,0x3FFF,0x0000,0x0000,0x0000,0x0000,0x0000, // Ascii = [E]
+0x0000,0x0000,0x0000,0x1FFF,0x1FFF,0x1E00,0x1E00,0x1E00,0x1E00,0x1E00,0x1E00,0x1FFF,0x1FFF,0x1E00,0x1E00,0x1E00,0x1E00,0x1E00,0x1E00,0x1E00,0x1E00,0x0000,0x0000,0x0000,0x0000,0x0000, // Ascii = [F]
+0x0000,0x0000,0x0000,0x03FE,0x0FFF,0x1F87,0x3E00,0x7C00,0x7C00,0x7800,0xF800,0xF800,0xF87F,0xF87F,0x780F,0x7C0F,0x7C0F,0x3E0F,0x1F8F,0x0FFF,0x03FE,0x0000,0x0000,0x0000,0x0000,0x0000, // Ascii = [G]
+0x0000,0x0000,0x0000,0x7C1F,0x7C1F,0x7C1F,0x7C1F,0x7C1F,0x7C1F,0x7C1F,0x7C1F,0x7FFF,0x7FFF,0x7C1F,0x7C1F,0x7C1F,0x7C1F,0x7C1F,0x7C1F,0x7C1F,0x7C1F,0x0000,0x0000,0x0000,0x0000,0x0000, // Ascii = [H]
+0x0000,0x0000,0x0000,0x3FFF,0x3FFF,0x03E0,0x03E0,0x03E0,0x03E0,0x03E0,0x03E0,0x03E0,0x03E0,0x03E0,0x03E0,0x03E0,0x03E0,0x03E0,0x03E0,0x3FFF,0x3FFF,0x0000,0x0000,0x0000,0x0000,0x0000, // Ascii = [I]
+0x0000,0x0000,0x0000,0x1FFC,0x1FFC,0x007C,0x007C,0x007C,0x007C,0x007C,0x007C,0x007C,0x007C,0x007C,0x007C,0x007C,0x0078,0x0078,0x38F8,0x3FF0,0x3FC0,0x0000,0x0000,0x0000,0x0000,0x0000, // Ascii = [J]
+0x0000,0x0000,0x0000,0x3C1F,0x3C1E,0x3C3C,0x3C78,0x3CF0,0x3DE0,0x3FE0,0x3FC0,0x3F80,0x3FC0,0x3FE0,0x3DF0,0x3CF0,0x3C78,0x3C7C,0x3C3E,0x3C1F,0x3C0F,0x0000,0x0000,0x0000,0x0000,0x0000, // Ascii = [K]
+0x0000,0x0000,0x0000,0x3E00,0x3E00,0x3E00,0x3E00,0x3E00,0x3E00,0x3E00,0x3E00,0x3E00,0x3E00,0x3E00,0x3E00,0x3E00,0x3E00,0x3E00,0x3E00,0x3FFF,0x3FFF,0x0000,0x0000,0x0000,0x0000,0x0000, // Ascii = [L]
+0x0000,0x0000,0x0000,0xF81F,0xFC1F,0xFC1F,0xFE3F,0xFE3F,0xFE3F,0xFF7F,0xFF77,0xFF77,0xF7F7,0xF7E7,0xF3E7,0xF3E7,0xF3C7,0xF007,0xF007,0xF007,0xF007,0x0000,0x0000,0x0000,0x0000,0x0000, // Ascii = [M]
+0x0000,0x0000,0x0000,0x7C0F,0x7C0F,0x7E0F,0x7F0F,0x7F0F,0x7F8F,0x7F8F,0x7FCF,0x7BEF,0x79EF,0x79FF,0x78FF,0x78FF,0x787F,0x783F,0x783F,0x781F,0x781F,0x0000,0x0000,0x0000,0x0000,0x0000, // Ascii = [N]
+0x0000,0x0000,0x0000,0x07F0,0x1FFC,0x3E3E,0x7C1F,0x780F,0x780F,0xF80F,0xF80F,0xF80F,0xF80F,0xF80F,0xF80F,0x780F,0x780F,0x7C1F,0x3E3E,0x1FFC,0x07F0,0x0000,0x0000,0x0000,0x0000,0x0000, // Ascii = [O]
+0x0000,0x0000,0x0000,0x3FFC,0x3FFF,0x3E1F,0x3E0F,0x3E0F,0x3E0F,0x3E0F,0x3E1F,0x3E3F,0x3FFC,0x3FF0,0x3E00,0x3E00,0x3E00,0x3E00,0x3E00,0x3E00,0x3E00,0x0000,0x0000,0x0000,0x0000,0x0000, // Ascii = [P]
+0x0000,0x0000,0x0000,0x07F0,0x1FFC,0x3E3E,0x7C1F,0x780F,0x780F,0xF80F,0xF80F,0xF80F,0xF80F,0xF80F,0xF80F,0x780F,0x780F,0x7C1F,0x3E3E,0x1FFC,0x07F8,0x007C,0x003F,0x000F,0x0003,0x0000, // Ascii = [Q]
+0x0000,0x0000,0x0000,0x3FF0,0x3FFC,0x3C7E,0x3C3E,0x3C1E,0x3C1E,0x3C3E,0x3C3C,0x3CFC,0x3FF0,0x3FE0,0x3DF0,0x3CF8,0x3C7C,0x3C3E,0x3C1E,0x3C1F,0x3C0F,0x0000,0x0000,0x0000,0x0000,0x0000, // Ascii = [R]
+0x0000,0x0000,0x0000,0x07FC,0x1FFE,0x3E0E,0x3C00,0x3C00,0x3C00,0x3E00,0x1FC0,0x0FF8,0x03FE,0x007F,0x001F,0x000F,0x000F,0x201F,0x3C3E,0x3FFC,0x1FF0,0x0000,0x0000,0x0000,0x0000,0x0000, // Ascii = [S]
+0x0000,0x0000,0x0000,0xFFFF,0xFFFF,0x03E0,0x03E0,0x03E0,0x03E0,0x03E0,0x03E0,0x03E0,0x03E0,0x03E0,0x03E0,0x03E0,0x03E0,0x03E0,0x03E0,0x03E0,0x03E0,0x0000,0x0000,0x0000,0x0000,0x0000, // Ascii = [T]
+0x0000,0x0000,0x0000,0x7C0F,0x7C0F,0x7C0F,0x7C0F,0x7C0F,0x7C0F,0x7C0F,0x7C0F,0x7C0F,0x7C0F,0x7C0F,0x7C0F,0x7C0F,0x3C1E,0x3C1E,0x3E3E,0x1FFC,0x07F0,0x0000,0x0000,0x0000,0x0000,0x0000, // Ascii = [U]
+0x0000,0x0000,0x0000,0xF007,0xF007,0xF807,0x780F,0x7C0F,0x3C1E,0x3C1E,0x3E1E,0x1E3C,0x1F3C,0x1F78,0x0F78,0x0FF8,0x07F0,0x07F0,0x07F0,0x03E0,0x03E0,0x0000,0x0000,0x0000,0x0000,0x0000, // Ascii = [V]
+0x0000,0x0000,0x0000,0xE003,0xF003,0xF003,0xF007,0xF3E7,0xF3E7,0xF3E7,0x73E7,0x7BF7,0x7FF7,0x7FFF,0x7F7F,0x7F7F,0x7F7E,0x3F7E,0x3E3E,0x3E3E,0x3E3E,0x0000,0x0000,0x0000,0x0000,0x0000, // Ascii = [W]
+0x0000,0x0000,0x0000,0xF807,0x7C0F,0x3E1E,0x3E3E,0x1F3C,0x0FF8,0x07F0,0x07E0,0x03E0,0x03E0,0x07F0,0x0FF8,0x0F7C,0x1E7C,0x3C3E,0x781F,0x780F,0xF00F,0x0000,0x0000,0x0000,0x0000,0x0000, // Ascii = [X]
+0x0000,0x0000,0x0000,0xF807,0x7807,0x7C0F,0x3C1E,0x3E1E,0x1F3C,0x0F78,0x0FF8,0x07F0,0x03E0,0x03E0,0x03E0,0x03E0,0x03E0,0x03E0,0x03E0,0x03E0,0x03E0,0x0000,0x0000,0x0000,0x0000,0x0000, // Ascii = [Y]
+0x0000,0x0000,0x0000,0x7FFF,0x7FFF,0x000F,0x001F,0x003E,0x007C,0x00F8,0x00F0,0x01E0,0x03E0,0x07C0,0x0F80,0x0F00,0x1E00,0x3E00,0x7C00,0x7FFF,0x7FFF,0x0000,0x0000,0x0000,0x0000,0x0000, // Ascii = [Z]
+0x07FF,0x0780,0x0780,0x0780,0x0780,0x0780,0x0780,0x0780,0x0780,0x0780,0x0780,0x0780,0x0780,0x0780,0x0780,0x0780,0x0780,0x0780,0x0780,0x0780,0x0780,0x0780,0x0780,0x07FF,0x07FF,0x0000, // Ascii = [[]
+0x7800,0x7800,0x3C00,0x3C00,0x1E00,0x1E00,0x0F00,0x0F00,0x0780,0x0780,0x03C0,0x03C0,0x01E0,0x01E0,0x00F0,0x00F0,0x0078,0x0078,0x003C,0x003C,0x001E,0x001E,0x000F,0x000F,0x0007,0x0000, // Ascii = [\]
+0x7FF0,0x00F0,0x00F0,0x00F0,0x00F0,0x00F0,0x00F0,0x00F0,0x00F0,0x00F0,0x00F0,0x00F0,0x00F0,0x00F0,0x00F0,0x00F0,0x00F0,0x00F0,0x00F0,0x00F0,0x00F0,0x00F0,0x00F0,0x7FF0,0x7FF0,0x0000, // Ascii = []]
+0x00C0,0x01C0,0x01C0,0x03E0,0x03E0,0x07F0,0x07F0,0x0778,0x0F78,0x0F38,0x1E3C,0x1E3C,0x3C1E,0x3C1E,0x380F,0x780F,0x7807,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000, // Ascii = [^]
+0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0xFFFF,0xFFFF,0x0000,0x0000,0x0000, // Ascii = [_]
+0x00F0,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000, // Ascii = [`]
+0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0FF8,0x3FFC,0x3C7C,0x003E,0x003E,0x003E,0x07FE,0x1FFE,0x3E3E,0x7C3E,0x783E,0x7C3E,0x7C7E,0x3FFF,0x1FCF,0x0000,0x0000,0x0000,0x0000,0x0000, // Ascii = [a]
+0x3C00,0x3C00,0x3C00,0x3C00,0x3C00,0x3C00,0x3DF8,0x3FFE,0x3F3E,0x3E1F,0x3C0F,0x3C0F,0x3C0F,0x3C0F,0x3C0F,0x3C0F,0x3C1F,0x3C1E,0x3F3E,0x3FFC,0x3BF0,0x0000,0x0000,0x0000,0x0000,0x0000, // Ascii = [b]
+0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x03FE,0x0FFF,0x1F87,0x3E00,0x3E00,0x3C00,0x7C00,0x7C00,0x7C00,0x3C00,0x3E00,0x3E00,0x1F87,0x0FFF,0x03FE,0x0000,0x0000,0x0000,0x0000,0x0000, // Ascii = [c]
+0x001F,0x001F,0x001F,0x001F,0x001F,0x001F,0x07FF,0x1FFF,0x3E3F,0x3C1F,0x7C1F,0x7C1F,0x7C1F,0x781F,0x781F,0x7C1F,0x7C1F,0x3C3F,0x3E7F,0x1FFF,0x0FDF,0x0000,0x0000,0x0000,0x0000,0x0000, // Ascii = [d]
+0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x03F8,0x0FFC,0x1F3E,0x3E1E,0x3C1F,0x7C1F,0x7FFF,0x7FFF,0x7C00,0x7C00,0x3C00,0x3E00,0x1F07,0x0FFF,0x03FE,0x0000,0x0000,0x0000,0x0000,0x0000, // Ascii = [e]
+0x01FF,0x03E1,0x03C0,0x07C0,0x07C0,0x07C0,0x7FFF,0x7FFF,0x07C0,0x07C0,0x07C0,0x07C0,0x07C0,0x07C0,0x07C0,0x07C0,0x07C0,0x07C0,0x07C0,0x07C0,0x07C0,0x0000,0x0000,0x0000,0x0000,0x0000, // Ascii = [f]
+0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x07EF,0x1FFF,0x3E7F,0x3C1F,0x7C1F,0x7C1F,0x781F,0x781F,0x781F,0x7C1F,0x7C1F,0x3C3F,0x3E7F,0x1FFF,0x0FDF,0x001E,0x001E,0x001E,0x387C,0x3FF8, // Ascii = [g]
+0x3C00,0x3C00,0x3C00,0x3C00,0x3C00,0x3C00,0x3DFC,0x3FFE,0x3F9E,0x3F1F,0x3E1F,0x3C1F,0x3C1F,0x3C1F,0x3C1F,0x3C1F,0x3C1F,0x3C1F,0x3C1F,0x3C1F,0x3C1F,0x0000,0x0000,0x0000,0x0000,0x0000, // Ascii = [h]
+0x01F0,0x01F0,0x0000,0x0000,0x0000,0x0000,0x7FE0,0x7FE0,0x01E0,0x01E0,0x01E0,0x01E0,0x01E0,0x01E0,0x01E0,0x01E0,0x01E0,0x01E0,0x01E0,0x01E0,0x01E0,0x0000,0x0000,0x0000,0x0000,0x0000, // Ascii = [i]
+0x00F8,0x00F8,0x0000,0x0000,0x0000,0x0000,0x3FF8,0x3FF8,0x00F8,0x00F8,0x00F8,0x00F8,0x00F8,0x00F8,0x00F8,0x00F8,0x00F8,0x00F8,0x00F8,0x00F8,0x00F8,0x00F8,0x00F8,0x00F0,0x71F0,0x7FE0, // Ascii = [j]
+0x3C00,0x3C00,0x3C00,0x3C00,0x3C00,0x3C00,0x3C1F,0x3C3E,0x3C7C,0x3CF8,0x3DF0,0x3DE0,0x3FC0,0x3FC0,0x3FE0,0x3DF0,0x3CF8,0x3C7C,0x3C3E,0x3C1F,0x3C1F,0x0000,0x0000,0x0000,0x0000,0x0000, // Ascii = [k]
+0x7FF0,0x01F0,0x01F0,0x01F0,0x01F0,0x01F0,0x01F0,0x01F0,0x01F0,0x01F0,0x01F0,0x01F0,0x01F0,0x01F0,0x01F0,0x01F0,0x01F0,0x01F0,0x01F0,0x01F0,0x01F0,0x0000,0x0000,0x0000,0x0000,0x0000, // Ascii = [l]
+0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0xF79E,0xFFFF,0xFFFF,0xFFFF,0xFBE7,0xF9E7,0xF1C7,0xF1C7,0xF1C7,0xF1C7,0xF1C7,0xF1C7,0xF1C7,0xF1C7,0xF1C7,0x0000,0x0000,0x0000,0x0000,0x0000, // Ascii = [m]
+0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x3DFC,0x3FFE,0x3F9E,0x3F1F,0x3E1F,0x3C1F,0x3C1F,0x3C1F,0x3C1F,0x3C1F,0x3C1F,0x3C1F,0x3C1F,0x3C1F,0x3C1F,0x0000,0x0000,0x0000,0x0000,0x0000, // Ascii = [n]
+0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x07F0,0x1FFC,0x3E3E,0x3C1F,0x7C1F,0x780F,0x780F,0x780F,0x780F,0x780F,0x7C1F,0x3C1F,0x3E3E,0x1FFC,0x07F0,0x0000,0x0000,0x0000,0x0000,0x0000, // Ascii = [o]
+0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x3DF8,0x3FFE,0x3F3E,0x3E1F,0x3C0F,0x3C0F,0x3C0F,0x3C0F,0x3C0F,0x3C0F,0x3C1F,0x3E1E,0x3F3E,0x3FFC,0x3FF8,0x3C00,0x3C00,0x3C00,0x3C00,0x3C00, // Ascii = [p]
+0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x07EE,0x1FFE,0x3E7E,0x3C1E,0x7C1E,0x781E,0x781E,0x781E,0x781E,0x781E,0x7C1E,0x7C3E,0x3E7E,0x1FFE,0x0FDE,0x001E,0x001E,0x001E,0x001E,0x001E, // Ascii = [q]
+0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x1F7F,0x1FFF,0x1FE7,0x1FC7,0x1F87,0x1F00,0x1F00,0x1F00,0x1F00,0x1F00,0x1F00,0x1F00,0x1F00,0x1F00,0x1F00,0x0000,0x0000,0x0000,0x0000,0x0000, // Ascii = [r]
+0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x07FC,0x1FFE,0x1E0E,0x3E00,0x3E00,0x3F00,0x1FE0,0x07FC,0x00FE,0x003E,0x001E,0x001E,0x3C3E,0x3FFC,0x1FF0,0x0000,0x0000,0x0000,0x0000,0x0000, // Ascii = [s]
+0x0000,0x0000,0x0000,0x0780,0x0780,0x0780,0x7FFF,0x7FFF,0x0780,0x0780,0x0780,0x0780,0x0780,0x0780,0x0780,0x0780,0x0780,0x0780,0x07C0,0x03FF,0x01FF,0x0000,0x0000,0x0000,0x0000,0x0000, // Ascii = [t]
+0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x3C1E,0x3C1E,0x3C1E,0x3C1E,0x3C1E,0x3C1E,0x3C1E,0x3C1E,0x3C1E,0x3C1E,0x3C3E,0x3C7E,0x3EFE,0x1FFE,0x0FDE,0x0000,0x0000,0x0000,0x0000,0x0000, // Ascii = [u]
+0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0xF007,0x780F,0x780F,0x3C1E,0x3C1E,0x3E1E,0x1E3C,0x1E3C,0x0F78,0x0F78,0x0FF0,0x07F0,0x07F0,0x03E0,0x03E0,0x0000,0x0000,0x0000,0x0000,0x0000, // Ascii = [v]
+0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0xF003,0xF1E3,0xF3E3,0xF3E7,0xF3F7,0xF3F7,0x7FF7,0x7F77,0x7F7F,0x7F7F,0x7F7F,0x3E3E,0x3E3E,0x3E3E,0x3E3E,0x0000,0x0000,0x0000,0x0000,0x0000, // Ascii = [w]
+0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x7C0F,0x3E1E,0x3E3C,0x1F3C,0x0FF8,0x07F0,0x07F0,0x03E0,0x07F0,0x07F8,0x0FF8,0x1E7C,0x3E3E,0x3C1F,0x781F,0x0000,0x0000,0x0000,0x0000,0x0000, // Ascii = [x]
+0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0xF807,0x780F,0x7C0F,0x3C1E,0x3C1E,0x1E3C,0x1E3C,0x1F3C,0x0F78,0x0FF8,0x07F0,0x07F0,0x03E0,0x03E0,0x03C0,0x03C0,0x03C0,0x0780,0x0F80,0x7F00, // Ascii = [y]
+0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x3FFF,0x3FFF,0x001F,0x003E,0x007C,0x00F8,0x01F0,0x03E0,0x07C0,0x0F80,0x1F00,0x1E00,0x3C00,0x7FFF,0x7FFF,0x0000,0x0000,0x0000,0x0000,0x0000, // Ascii = [z]
+0x01FE,0x03E0,0x03C0,0x03C0,0x03C0,0x03C0,0x01E0,0x01E0,0x01E0,0x01C0,0x03C0,0x3F80,0x3F80,0x03C0,0x01C0,0x01E0,0x01E0,0x01E0,0x03C0,0x03C0,0x03C0,0x03C0,0x03E0,0x01FE,0x007E,0x0000, // Ascii = [{]
+0x01C0,0x01C0,0x01C0,0x01C0,0x01C0,0x01C0,0x01C0,0x01C0,0x01C0,0x01C0,0x01C0,0x01C0,0x01C0,0x01C0,0x01C0,0x01C0,0x01C0,0x01C0,0x01C0,0x01C0,0x01C0,0x01C0,0x01C0,0x01C0,0x01C0,0x0000, // Ascii = [|]
+0x3FC0,0x03E0,0x01E0,0x01E0,0x01E0,0x01E0,0x01C0,0x03C0,0x03C0,0x01C0,0x01E0,0x00FE,0x00FE,0x01E0,0x01C0,0x03C0,0x03C0,0x01C0,0x01E0,0x01E0,0x01E0,0x01E0,0x03E0,0x3FC0,0x3F00,0x0000, // Ascii = [}]
+0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x3F07,0x7FC7,0x73E7,0xF1FF,0xF07E,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000, // Ascii = [~]
+};
+
+
+
+
+
+    
+
+FontDef Font_7x10 = {7,10,Font7x10};
+FontDef Font_11x18 = {11,18,Font11x18};
+FontDef Font_16x26 = {16,26,Font16x26};
--- a/Core/Bsp/BSP_Device/spi_st7735s/fonts.h
+++ b/Core/Bsp/BSP_Device/spi_st7735s/fonts.h
@@ -0,0 +1,19 @@
+#ifndef __FONTS_H__
+#define __FONTS_H__
+#include <stdint.h>
+
+typedef struct {
+    const uint8_t width;
+    uint8_t height;
+    const uint16_t *data;
+} FontDef;
+
+
+extern FontDef Font_7x10;
+extern FontDef Font_11x18;
+extern FontDef Font_16x26;
+
+
+
+
+#endif // __FONTS_H__
--- a/Core/Bsp/BSP_Device/spi_st7735s/spi_st7735s.c
+++ b/Core/Bsp/BSP_Device/spi_st7735s/spi_st7735s.c
@@ -0,0 +1,519 @@
+#include "spi_st7735s.h"
+#include "stm32f1xx_hal_spi.h"
+
+/* vim: set ai et ts=4 sw=4: */
+
+#define DELAY 0x80
+
+// based on Adafruit ST7735 library for Arduino
+static const uint8_t
+    init_cmds1[] = {           // Init for 7735R, part 1 (red or green tab)
+        15,                    // 15 commands in list:
+        ST7735_SWRESET, DELAY, //  1: Software reset, 0 args, w/delay
+        150,                   //     150 ms delay
+        ST7735_SLPOUT, DELAY,  //  2: Out of sleep mode, 0 args, w/delay
+        255,                   //     500 ms delay
+        ST7735_FRMCTR1, 3,     //  3: Frame rate ctrl - normal mode, 3 args:
+        0x01, 0x2C, 0x2D,      //     Rate = fosc/(1x2+40) * (LINE+2C+2D)
+        ST7735_FRMCTR2, 3,     //  4: Frame rate control - idle mode, 3 args:
+        0x01, 0x2C, 0x2D,      //     Rate = fosc/(1x2+40) * (LINE+2C+2D)
+        ST7735_FRMCTR3, 6,     //  5: Frame rate ctrl - partial mode, 6 args:
+        0x01, 0x2C, 0x2D,      //     Dot inversion mode
+        0x01, 0x2C, 0x2D,      //     Line inversion mode
+        ST7735_INVCTR, 1,      //  6: Display inversion ctrl, 1 arg, no delay:
+        0x07,                  //     No inversion
+        ST7735_PWCTR1, 3,      //  7: Power control, 3 args, no delay:
+        0xA2,
+        0x02,             //     -4.6V
+        0x84,             //     AUTO mode
+        ST7735_PWCTR2, 1, //  8: Power control, 1 arg, no delay:
+        0xC5,             //     VGH25 = 2.4C VGSEL = -10 VGH = 3 * AVDD
+        ST7735_PWCTR3, 2, //  9: Power control, 2 args, no delay:
+        0x0A,             //     Opamp current small
+        0x00,             //     Boost frequency
+        ST7735_PWCTR4, 2, // 10: Power control, 2 args, no delay:
+        0x8A,             //     BCLK/2, Opamp current small & Medium low
+        0x2A,
+        ST7735_PWCTR5, 2, // 11: Power control, 2 args, no delay:
+        0x8A, 0xEE,
+        ST7735_VMCTR1, 1, // 12: Power control, 1 arg, no delay:
+        0x0E,
+        ST7735_INVOFF, 0, // 13: Don't invert display, no args, no delay
+        ST7735_MADCTL, 1, // 14: Memory access control (directions), 1 arg:
+        ST7735_ROTATION,  //     row addr/col addr, bottom to top refresh
+        ST7735_COLMOD, 1, // 15: set color mode, 1 arg, no delay:
+        0x05},            //     16-bit color
+
+#if (defined(ST7735_IS_128X128) || defined(ST7735_IS_160X128))
+    init_cmds2[] = {     // Init for 7735R, part 2 (1.44" display)
+        2,               //  2 commands in list:
+        ST7735_CASET, 4, //  1: Column addr set, 4 args, no delay:
+        0x00, 0x00,      //     XSTART = 0
+        0x00, 0x7F,      //     XEND = 127
+        ST7735_RASET, 4, //  2: Row addr set, 4 args, no delay:
+        0x00, 0x00,      //     XSTART = 0
+        0x00, 0x7F},     //     XEND = 127
+#endif                   // ST7735_IS_128X128
+
+#ifdef ST7735_IS_160X80
+    init_cmds2[] = {      // Init for 7735S, part 2 (160x80 display)
+        3,                //  3 commands in list:
+        ST7735_CASET, 4,  //  1: Column addr set, 4 args, no delay:
+        0x00, 0x00,       //     XSTART = 0
+        0x00, 0x4F,       //     XEND = 79
+        ST7735_RASET, 4,  //  2: Row addr set, 4 args, no delay:
+        0x00, 0x00,       //     XSTART = 0
+        0x00, 0x9F,       //     XEND = 159
+        ST7735_INVON, 0}, //  3: Invert colors
+#endif
+
+    init_cmds3[] = {                                                                                                         // Init for 7735R, part 3 (red or green tab)
+        4,                                                                                                                   //  4 commands in list:
+        ST7735_GMCTRP1, 16,                                                                                                  //  1: Gamma Adjustments (pos. polarity), 16 args, no delay:
+        0x02, 0x1c, 0x07, 0x12, 0x37, 0x32, 0x29, 0x2d, 0x29, 0x25, 0x2B, 0x39, 0x00, 0x01, 0x03, 0x10, ST7735_GMCTRN1, 16,  //  2: Gamma Adjustments (neg. polarity), 16 args, no delay:
+        0x03, 0x1d, 0x07, 0x06, 0x2E, 0x2C, 0x29, 0x2D, 0x2E, 0x2E, 0x37, 0x3F, 0x00, 0x00, 0x02, 0x10, ST7735_NORON, DELAY, //  3: Normal display on, no args, w/delay
+        10,                                                                                                                  //     10 ms delay
+        ST7735_DISPON, DELAY,                                                                                                //  4: Main screen turn on, no args w/delay
+        100};                                                                                                                //     100 ms delay
+
+static void ST7735_Select()
+{
+  HAL_GPIO_WritePin(ST7735_CS_GPIO_Port, ST7735_CS_Pin, GPIO_PIN_RESET);
+}
+
+void ST7735_Unselect()
+{
+  HAL_GPIO_WritePin(ST7735_CS_GPIO_Port, ST7735_CS_Pin, GPIO_PIN_SET);
+}
+
+static void ST7735_Reset()
+{
+  HAL_GPIO_WritePin(ST7735_RES_GPIO_Port, ST7735_RES_Pin, GPIO_PIN_RESET);
+  HAL_Delay(5);
+  HAL_GPIO_WritePin(ST7735_RES_GPIO_Port, ST7735_RES_Pin, GPIO_PIN_SET);
+}
+
+static void ST7735_WriteCommand(uint8_t cmd)
+{
+  HAL_GPIO_WritePin(ST7735_DC_GPIO_Port, ST7735_DC_Pin, GPIO_PIN_RESET);
+
+  HAL_SPI_Transmit(&ST7735_SPI_PORT, &cmd, sizeof(cmd), HAL_MAX_DELAY);
+//   HAL_SPI_Transmit_DMA(&ST7735_SPI_PORT, &cmd, sizeof(cmd));
+}
+
+static void ST7735_WriteData(uint8_t *buff, size_t buff_size)
+{
+  HAL_GPIO_WritePin(ST7735_DC_GPIO_Port, ST7735_DC_Pin, GPIO_PIN_SET);
+
+ HAL_SPI_Transmit(&ST7735_SPI_PORT, buff, buff_size, HAL_MAX_DELAY);
+    // HAL_SPI_Transmit_DMA(&ST7735_SPI_PORT, buff, buff_size);
+}
+
+static void ST7735_ExecuteCommandList(const uint8_t *addr)
+{
+  uint8_t numCommands, numArgs;
+  uint16_t ms;
+
+  numCommands = *addr++;
+  while (numCommands--)
+  {
+    uint8_t cmd = *addr++;
+    ST7735_WriteCommand(cmd);
+
+    numArgs = *addr++;
+    // If high bit set, delay follows args
+    ms = numArgs & DELAY;
+    numArgs &= ~DELAY;
+    if (numArgs)
+    {
+      ST7735_WriteData((uint8_t *)addr, numArgs);
+      addr += numArgs;
+    }
+
+    if (ms)
+    {
+      ms = *addr++;
+      if (ms == 255)
+        ms = 500;
+      HAL_Delay(ms);
+    }
+  }
+}
+
+/**
+ * 设置ST7735显示屏的地址窗口
+ *
+ * 本函数通过发送特定的命令和数据到ST7735显示屏，来设置显示区域的地址窗口
+ * 这包括设置列地址和行地址，并准备写入RAM
+ *
+ * @param x0 显示窗口左上角的X坐标
+ * @param y0 显示窗口左上角的Y坐标
+ * @param x1 显示窗口右下角的X坐标
+ * @param y1 显示窗口右下角的Y坐标
+ */
+static void ST7735_SetAddressWindow(uint8_t x0, uint8_t y0, uint8_t x1, uint8_t y1)
+{
+  // column address set
+  ST7735_WriteCommand(ST7735_CASET);
+  // 设置列地址范围，考虑到显示区域的起始偏移
+  uint8_t data[] = {0x00, x0 + ST7735_XSTART, 0x00, x1 + ST7735_XSTART};
+  ST7735_WriteData(data, sizeof(data));
+
+  // row address set
+  ST7735_WriteCommand(ST7735_RASET);
+  // 设置行地址范围，考虑到显示区域的起始偏移
+  data[1] = y0 + ST7735_YSTART;
+  data[3] = y1 + ST7735_YSTART;
+  ST7735_WriteData(data, sizeof(data));
+
+  // write to RAM
+  ST7735_WriteCommand(ST7735_RAMWR);
+  // 准备写入RAM，以在设置的地址窗口内显示内容
+}
+
+/**
+ * @brief 初始化ST7735液晶显示器
+ *
+ * 本函数执行ST7735液晶显示器的初始化步骤，包括复位、执行初始化命令列表，
+ * 以及初始化完成后填充屏幕为黄色。这些操作确保了显示器能够正确配置并进入
+ * 可显示状态。
+ */
+void ST7735_Init()
+{
+  // 选择ST7735设备，准备进行初始化
+  ST7735_Select();
+
+  // 复位ST7735显示器，确保从一个已知的状态开始
+  ST7735_Reset();
+
+  // 执行第一组初始化命令，配置显示器的基本设置
+  ST7735_ExecuteCommandList(init_cmds1);
+
+  // 执行第二组初始化命令，进一步配置显示器的显示模式等
+  ST7735_ExecuteCommandList(init_cmds2);
+
+  // 执行第三组初始化命令，完成显示器的初始化配置
+  ST7735_ExecuteCommandList(init_cmds3);
+
+  // 取消选择ST7735设备，初始化命令执行完毕
+  ST7735_Unselect();
+
+  // 初始化完成后，快速填充整个屏幕为白色，作为初始化完成的标志
+  ST7735_FillScreenFast(ST7735_WHITE);
+
+  HAL_GPIO_WritePin(LCD_BLK_GPIO_Port, LCD_BLK_Pin, GPIO_PIN_SET);
+}
+
+/**
+ * 在ST7735液晶显示屏上绘制一个像素点。
+ *
+ * 此函数通过接收x和y坐标以及颜色值来在指定位置绘制一个像素点。
+ * 它首先检查给定的坐标是否超出了显示屏的边界，如果超出则直接返回。
+ * 然后，它会选择显示屏，并设置绘制区域的窗口地址，接着发送颜色数据，
+ * 最后取消选择显示屏。
+ *
+ * @param x 横坐标，表示像素点在显示屏上的水平位置。
+ * @param y 纵坐标，表示像素点在显示屏上的垂直位置。
+ * @param color 像素点的颜色值，采用RGB565格式。
+ */
+void ST7735_DrawPixel(uint16_t x, uint16_t y, uint16_t color)
+{
+  // 检查坐标是否超出显示屏边界
+  if ((x >= ST7735_WIDTH) || (y >= ST7735_HEIGHT))
+    return;
+
+  // 选择显示屏以进行操作
+  ST7735_Select();
+
+  // 设置绘制像素点的窗口地址
+  ST7735_SetAddressWindow(x, y, x + 1, y + 1);
+
+  // 准备颜色数据，分为高字节和低字节
+  uint8_t data[] = {color >> 8, color & 0xFF};
+
+  // 发送颜色数据到显示屏
+  //ST7735_WriteData(data, sizeof(data));
+
+  HAL_GPIO_WritePin(ST7735_DC_GPIO_Port, ST7735_DC_Pin, GPIO_PIN_SET);
+
+  HAL_SPI_Transmit_DMA(&ST7735_SPI_PORT, data, sizeof(data));
+
+//   HAL_SPI_Transmit(&ST7735_SPI_PORT, data, sizeof(data), HAL_MAX_DELAY);
+
+  // 取消选择显示屏，结束操作
+  ST7735_Unselect();
+}
+
+/**
+ * 在ST7735液晶显示屏上写入一个字符
+ *
+ * @param x 字符显示的起始X坐标
+ * @param y 字符显示的起始Y坐标
+ * @param ch 要显示的字符
+ * @param font 字体定义结构体，包含字体的宽度、高度和数据
+ * @param color 字符的颜色
+ * @param bgcolor 背景颜色
+ */
+static void ST7735_WriteChar(uint16_t x, uint16_t y, char ch, FontDef *font, uint16_t color, uint16_t bgcolor)
+{
+  // 定义循环变量和临时变量
+  uint32_t i, b, j;
+
+  // 设置显示窗口，即字符显示的区域
+  ST7735_SetAddressWindow(x, y, x + font->width - 1, y + font->height - 1);
+
+  // 遍历字符的每一行
+  for (i = 0; i < font->height; i++)
+  {
+    // 获取当前行的字形数据
+    b = font->data[(ch - 32) * font->height + i];
+    // 遍历当前行的每一列
+    for (j = 0; j < font->width; j++)
+    {
+      // 检查当前列是否为前景色
+      if ((b << j) & 0x8000)
+      {
+        // 是前景色，则发送颜色数据到显示屏
+        uint8_t data[] = {color >> 8, color & 0xFF};
+        ST7735_WriteData(data, sizeof(data));
+      }
+      else
+      {
+        // 不是前景色，则发送背景色数据到显示屏
+        uint8_t data[] = {bgcolor >> 8, bgcolor & 0xFF};
+        ST7735_WriteData(data, sizeof(data));
+      }
+    }
+  }
+}
+
+/*
+Simpler (and probably slower) implementation:
+
+static void ST7735_WriteChar(uint16_t x, uint16_t y, char ch, FontDef font, uint16_t color) {
+    uint32_t i, b, j;
+
+    for(i = 0; i < font->height; i++) {
+        b = font->data[(ch - 32) * font->height + i];
+        for(j = 0; j < font->width; j++) {
+            if((b << j) & 0x8000)  {
+                ST7735_DrawPixel(x + j, y + i, color);
+            }
+        }
+    }
+}
+*/
+
+void ST7735_WriteString(uint16_t x, uint16_t y, const char *str, FontDef *font, uint16_t color, uint16_t bgcolor)
+{
+  ST7735_Select();
+
+  while (*str)
+  {
+    if (x + font->width >= ST7735_WIDTH)
+    {
+      x = 0;
+      y += font->height;
+      if (y + font->height >= ST7735_HEIGHT)
+      {
+        break;
+      }
+
+      if (*str == ' ')
+      {
+        // skip spaces in the beginning of the new line
+        str++;
+        continue;
+      }
+    }
+
+    ST7735_WriteChar(x, y, *str, font, color, bgcolor);
+    x += font->width;
+    str++;
+  }
+
+  ST7735_Unselect();
+}
+
+/**
+ * 在ST7735显示屏上绘制填充矩形
+ *
+ * 此函数通过指定的坐标、宽度、高度和颜色，在ST7735显示屏上绘制一个填充矩形
+ * 它首先执行裁剪操作，以确保绘制的矩形不会超出显示屏的边界
+ * 然后设置矩形的绘制区域，并通过SPI接口发送相应的像素数据
+ *
+ * @param x 矩形左上角的x坐标
+ * @param y 矩形左上角的y坐标
+ * @param w 矩形的宽度
+ * @param h 矩形的高度
+ * @param color 用于填充矩形的颜色
+ */
+void ST7735_FillRectangle(uint16_t x, uint16_t y, uint16_t w, uint16_t h, uint16_t color)
+{
+  // clipping
+  if ((x >= ST7735_WIDTH) || (y >= ST7735_HEIGHT))
+    return;
+  if ((x + w - 1) >= ST7735_WIDTH)
+    w = ST7735_WIDTH - x;
+  if ((y + h - 1) >= ST7735_HEIGHT)
+    h = ST7735_HEIGHT - y;
+
+  // Select the ST7735 display for communication
+  ST7735_Select();
+  // Set the drawing area for the rectangle
+  ST7735_SetAddressWindow(x, y, x + w - 1, y + h - 1);
+
+  // Prepare the color data to be sent
+  uint8_t data[] = {color >> 8, color & 0xFF};
+  // Set the data/command pin to data mode
+  HAL_GPIO_WritePin(ST7735_DC_GPIO_Port, ST7735_DC_Pin, GPIO_PIN_SET);
+  // Send the color data for each pixel in the rectangle
+  for (y = h; y > 0; y--)
+  {
+    for (x = w; x > 0; x--)
+    {
+
+    //   HAL_SPI_Transmit(&ST7735_SPI_PORT, data, sizeof(data), HAL_MAX_DELAY);
+          HAL_SPI_Transmit_DMA(&ST7735_SPI_PORT, data, sizeof(data));
+    }
+  }
+
+  // Unselect the ST7735 display after drawing is complete
+  ST7735_Unselect();
+}
+
+// Fill a rectangle area on the ST7735 LCD screen with a specified color
+// This function is optimized for speed, suitable for filling large areas
+void ST7735_FillRectangleFast(uint16_t x, uint16_t y, uint16_t w, uint16_t h, uint16_t color)
+{
+  // clipping
+  if ((x >= ST7735_WIDTH) || (y >= ST7735_HEIGHT))
+    return;
+  if ((x + w - 1) >= ST7735_WIDTH)
+    w = ST7735_WIDTH - x;
+  if ((y + h - 1) >= ST7735_HEIGHT)
+    h = ST7735_HEIGHT - y;
+
+  ST7735_Select();
+  ST7735_SetAddressWindow(x, y, x + w - 1, y + h - 1);
+
+  // Prepare whole line in a single buffer
+  uint8_t pixel[] = {color >> 8, color & 0xFF};
+  uint8_t *line = malloc(w * sizeof(pixel));
+  for (x = 0; x < w; ++x)
+    memcpy(line + x * sizeof(pixel), pixel, sizeof(pixel));
+
+  HAL_GPIO_WritePin(ST7735_DC_GPIO_Port, ST7735_DC_Pin, GPIO_PIN_SET);
+  for (y = h; y > 0; y--)
+
+    HAL_SPI_Transmit(&ST7735_SPI_PORT, line, w * sizeof(pixel), HAL_MAX_DELAY);
+
+  free(line);
+  ST7735_Unselect();
+}
+
+/**
+ * 填充整个屏幕为指定颜色。
+ *
+ * @param color 要填充的颜色值。
+ */
+void ST7735_FillScreen(uint16_t color)
+{
+  // 使用FillRectangle函数填充整个屏幕，起始坐标为(0, 0)，覆盖整个屏幕宽度和高度。
+  ST7735_FillRectangle(0, 0, ST7735_WIDTH, ST7735_HEIGHT, color);
+}
+
+/**
+ * ST7735_FillScreenFast函数
+ *
+ * 使用指定的颜色填充整个屏幕。该函数通过调用ST7735_FillRectangleFast函数，
+ * 设置填充区域为整个屏幕的宽度和高度来实现快速填充屏幕的效果。
+ *
+ * @param color 填充屏幕所使用的颜色值。这是一个16位的颜色值，适用于ST7735显示屏。
+ */
+void ST7735_FillScreenFast(uint16_t color)
+{
+  // 调用快速填充矩形函数，参数为(起始X坐标, 起始Y坐标, 屏幕宽度, 屏幕高度, 颜色)
+  // 用于填充整个屏幕为指定的颜色
+  ST7735_FillRectangleFast(0, 0, ST7735_WIDTH, ST7735_HEIGHT, color);
+}
+
+/**
+ * 在ST7735液晶屏上绘制图像
+ *
+ * 此函数将根据提供的参数和图像数据，在ST7735液晶屏的指定位置绘制图像
+ * 它首先检查图像的绘制区域是否超出液晶屏的边界，如果超出，则直接返回
+ * 如果未超出，它将选择液晶屏，设置图像绘制的窗口区域，然后写入图像数据
+ *
+ * @param x 图像绘制区域的起始x坐标
+ * @param y 图像绘制区域的起始y坐标
+ * @param w 图像的宽度
+ * @param h 图像的高度
+ * @param data 图像数据指针，图像数据是16位的RGB565格式
+ */
+void ST7735_DrawImage(uint16_t x, uint16_t y, uint16_t w, uint16_t h, const uint16_t *data)
+{
+  // 检查图像的起始坐标是否超出液晶屏的边界
+  if ((x >= ST7735_WIDTH) || (y >= ST7735_HEIGHT))
+    return;
+
+  // 检查图像的结束x坐标是否超出液晶屏的宽度
+  if ((x + w - 1) >= ST7735_WIDTH)
+    return;
+
+  // 检查图像的结束y坐标是否超出液晶屏的高度
+  if ((y + h - 1) >= ST7735_HEIGHT)
+    return;
+
+  // 选择液晶屏，准备写入数据
+  ST7735_Select();
+
+  // 设置图像绘制的窗口区域
+  ST7735_SetAddressWindow(x, y, x + w - 1, y + h - 1);
+
+  // 写入图像数据，图像数据是16位的RGB565格式
+  ST7735_WriteData((uint8_t *)data, sizeof(uint16_t) * w * h);
+
+  // 取消选择液晶屏
+  ST7735_Unselect();
+}
+
+/**
+ * ST7735_InvertColors函数用于控制ST7735显示屏的颜色反转功能。
+ *
+ * @param invert 一个布尔值，决定是否反转显示屏的颜色。如果invert为true，颜色将反转；如果为false，颜色将保持正常。
+ */
+void ST7735_InvertColors(bool invert)
+{
+  // 选择ST7735显示屏以进行通信。
+  ST7735_Select();
+
+  // 发送命令以反转或恢复正常显示颜色，具体取决于invert参数的值。
+  ST7735_WriteCommand(invert ? ST7735_INVON : ST7735_INVOFF);
+
+  // 取消选择ST7735显示屏，结束通信。
+  ST7735_Unselect();
+}
+
+/**
+ * @brief 设置ST7735显示器的伽马曲线
+ *
+ * 本函数通过选择合适的伽马曲线来调整显示器的颜色特性。伽马曲线影响显示器如何呈现颜色的深浅，
+ * 对于不同的显示需求，可以选择不同的伽马曲线设置。
+ *
+ * @param gamma 伽马曲线定义，指定要设置的伽马曲线
+ */
+void ST7735_SetGamma(GammaDef gamma)
+{
+  // 选择ST7735显示器以进行通信
+  ST7735_Select();
+
+  // 发送伽马设置命令到ST7735显示器
+  ST7735_WriteCommand(ST7735_GAMSET);
+
+  // 发送具体的伽马曲线数据到显示器
+  ST7735_WriteData((uint8_t *)&gamma, sizeof(gamma));
+
+  // 通信完成后取消选择ST7735显示器
+  ST7735_Unselect();
+}
--- a/Core/Bsp/BSP_Device/spi_st7735s/spi_st7735s.h
+++ b/Core/Bsp/BSP_Device/spi_st7735s/spi_st7735s.h
@@ -0,0 +1,327 @@
+
+#ifndef _SPI_ST7735S_H
+#define _SPI_ST7735S_H
+
+#include "stm32f1xx_hal.h"
+#include "main.h"
+#include "fonts.h"
+#include <stdbool.h>
+#include <stdlib.h>
+#include "string.h"
+#include "FreeRTOS.h"
+#include "cmsis_os.h"
+
+
+
+#define ST7735_MADCTL_MY 0x80
+#define ST7735_MADCTL_MX 0x40
+#define ST7735_MADCTL_MV 0x20
+#define ST7735_MADCTL_ML 0x10
+#define ST7735_MADCTL_RGB 0x00
+#define ST7735_MADCTL_BGR 0x08
+#define ST7735_MADCTL_MH 0x04
+
+/*** Redefine if necessary ***/
+#define ST7735_SPI_PORT hspi1
+extern SPI_HandleTypeDef ST7735_SPI_PORT;
+
+#define ST7735_RES_Pin LCD_RESET_Pin
+#define ST7735_RES_GPIO_Port LCD_RESET_GPIO_Port
+#define ST7735_CS_Pin LCD_CS_Pin
+#define ST7735_CS_GPIO_Port LCD_CS_GPIO_Port
+#define ST7735_DC_Pin LCD_DC_Pin
+#define ST7735_DC_GPIO_Port LCD_DC_GPIO_Port
+
+// AliExpress/eBay 1.8" display, default orientation
+/*
+#define ST7735_IS_160X128 1
+#define ST7735_WIDTH  128
+#define ST7735_HEIGHT 160
+#define ST7735_XSTART 0
+#define ST7735_YSTART 0
+#define ST7735_ROTATION (ST7735_MADCTL_MX | ST7735_MADCTL_MY)
+*/
+
+// AliExpress/eBay 1.8" display, rotate right
+/*
+#define ST7735_IS_160X128 1
+#define ST7735_WIDTH  160
+#define ST7735_HEIGHT 128
+#define ST7735_XSTART 0
+#define ST7735_YSTART 0
+#define ST7735_ROTATION (ST7735_MADCTL_MY | ST7735_MADCTL_MV)
+*/
+
+// AliExpress/eBay 1.8" display, rotate left
+/*
+#define ST7735_IS_160X128 1
+#define ST7735_WIDTH  160
+#define ST7735_HEIGHT 128
+#define ST7735_XSTART 0
+#define ST7735_YSTART 0
+#define ST7735_ROTATION (ST7735_MADCTL_MX | ST7735_MADCTL_MV)
+*/
+
+// AliExpress/eBay 1.8" display, upside down
+/*
+#define ST7735_IS_160X128 1
+#define ST7735_WIDTH  128
+#define ST7735_HEIGHT 160
+#define ST7735_XSTART 0
+#define ST7735_YSTART 0
+#define ST7735_ROTATION (0)
+*/
+
+// WaveShare ST7735S-based 1.8" display, default orientation
+/*
+#define ST7735_IS_160X128 1
+#define ST7735_WIDTH  128
+#define ST7735_HEIGHT 160
+#define ST7735_XSTART 2
+#define ST7735_YSTART 1
+#define ST7735_ROTATION (ST7735_MADCTL_MX | ST7735_MADCTL_MY | ST7735_MADCTL_RGB)
+*/
+
+// WaveShare ST7735S-based 1.8" display, rotate right
+/*
+#define ST7735_IS_160X128 1
+#define ST7735_WIDTH  160
+#define ST7735_HEIGHT 128
+#define ST7735_XSTART 1
+#define ST7735_YSTART 2
+#define ST7735_ROTATION (ST7735_MADCTL_MY | ST7735_MADCTL_MV | ST7735_MADCTL_RGB)
+*/
+
+// WaveShare ST7735S-based 1.8" display, rotate left
+/*
+#define ST7735_IS_160X128 1
+#define ST7735_WIDTH  160
+#define ST7735_HEIGHT 128
+#define ST7735_XSTART 1
+#define ST7735_YSTART 2
+#define ST7735_ROTATION (ST7735_MADCTL_MX | ST7735_MADCTL_MV | ST7735_MADCTL_RGB)
+*/
+
+// WaveShare ST7735S-based 1.8" display, upside down
+/*
+#define ST7735_IS_160X128 1
+#define ST7735_WIDTH  128
+#define ST7735_HEIGHT 160
+#define ST7735_XSTART 2
+#define ST7735_YSTART 1
+#define ST7735_ROTATION (ST7735_MADCTL_RGB)
+*/
+
+// 1.44" display, default orientation
+/*#define ST7735_IS_128X128 1
+#define ST7735_WIDTH  128
+#define ST7735_HEIGHT 128
+#define ST7735_XSTART 2
+#define ST7735_YSTART 3
+#define ST7735_ROTATION (ST7735_MADCTL_MX | ST7735_MADCTL_MY | ST7735_MADCTL_BGR)
+*/
+// 1.44" display, rotate right
+/*
+#define ST7735_IS_128X128 1
+#define ST7735_WIDTH  128
+#define ST7735_HEIGHT 128
+#define ST7735_XSTART 3
+#define ST7735_YSTART 2
+#define ST7735_ROTATION (ST7735_MADCTL_MY | ST7735_MADCTL_MV | ST7735_MADCTL_BGR)
+*/
+
+// 1.44" display, rotate left
+/*
+#define ST7735_IS_128X128 1
+#define ST7735_WIDTH  128
+#define ST7735_HEIGHT 128
+#define ST7735_XSTART 1
+#define ST7735_YSTART 2
+#define ST7735_ROTATION (ST7735_MADCTL_MX | ST7735_MADCTL_MV | ST7735_MADCTL_BGR)
+*/
+
+// 1.44" display, upside down
+/*
+#define ST7735_IS_128X128 1
+#define ST7735_WIDTH  128
+#define ST7735_HEIGHT 128
+#define ST7735_XSTART 2
+#define ST7735_YSTART 1
+#define ST7735_ROTATION (ST7735_MADCTL_BGR)
+*/
+
+// mini 160x80 display (it's unlikely you want the default orientation)
+/*
+#define ST7735_IS_160X80 1
+#define ST7735_XSTART 26
+#define ST7735_YSTART 1
+#define ST7735_WIDTH  80
+#define ST7735_HEIGHT 160
+#define ST7735_ROTATION (ST7735_MADCTL_MX | ST7735_MADCTL_MY | ST7735_MADCTL_BGR)
+*/
+
+// mini 160x80, rotate left
+
+#define ST7735_IS_160X80 1
+#define ST7735_XSTART 1
+#define ST7735_YSTART 26
+#define ST7735_WIDTH 160
+#define ST7735_HEIGHT 80
+#define ST7735_ROTATION (ST7735_MADCTL_MX | ST7735_MADCTL_MV | ST7735_MADCTL_BGR)
+
+// mini 160x80, rotate right
+/*
+ * 定义ST7735显示屏的相关参数和配置
+
+#define ST7735_IS_160X80 1 // 定义显示屏的分辨率是否为160x80
+#define ST7735_XSTART 1   // 定义显示屏X轴的起始位置
+#define ST7735_YSTART 26  // 定义显示屏Y轴的起始位置
+#define ST7735_WIDTH  160 // 定义显示屏的宽度
+#define ST7735_HEIGHT 80  // 定义显示屏的高度
+
+ * 定义显示屏的旋转配置，包括垂直镜像、水平镜像和颜色顺序
+ * ST7735_MADCTL_MY: 垂直镜像
+ * ST7735_MADCTL_MV: 水平镜像
+ * ST7735_MADCTL_BGR: 颜色顺序为BGR
+
+#define ST7735_ROTATION (ST7735_MADCTL_MY | ST7735_MADCTL_MV | ST7735_MADCTL_BGR)
+*/
+/****************************/
+
+#define ST7735_NOP 0x00
+#define ST7735_SWRESET 0x01
+#define ST7735_RDDID 0x04
+#define ST7735_RDDST 0x09
+
+#define ST7735_SLPIN 0x10
+#define ST7735_SLPOUT 0x11
+#define ST7735_PTLON 0x12
+#define ST7735_NORON 0x13
+
+#define ST7735_INVOFF 0x20
+#define ST7735_INVON 0x21
+#define ST7735_GAMSET 0x26
+#define ST7735_DISPOFF 0x28
+#define ST7735_DISPON 0x29
+#define ST7735_CASET 0x2A
+#define ST7735_RASET 0x2B
+#define ST7735_RAMWR 0x2C
+#define ST7735_RAMRD 0x2E
+
+#define ST7735_PTLAR 0x30
+#define ST7735_COLMOD 0x3A
+#define ST7735_MADCTL 0x36
+
+#define ST7735_FRMCTR1 0xB1
+#define ST7735_FRMCTR2 0xB2
+#define ST7735_FRMCTR3 0xB3
+#define ST7735_INVCTR 0xB4
+#define ST7735_DISSET5 0xB6
+
+#define ST7735_PWCTR1 0xC0
+#define ST7735_PWCTR2 0xC1
+#define ST7735_PWCTR3 0xC2
+#define ST7735_PWCTR4 0xC3
+#define ST7735_PWCTR5 0xC4
+#define ST7735_VMCTR1 0xC5
+
+#define ST7735_RDID1 0xDA
+#define ST7735_RDID2 0xDB
+#define ST7735_RDID3 0xDC
+#define ST7735_RDID4 0xDD
+
+#define ST7735_PWCTR6 0xFC
+
+#define ST7735_GMCTRP1 0xE0
+#define ST7735_GMCTRN1 0xE1
+
+// Color definitions
+#define ST7735_BLACK 0x0000   // 黑色
+#define ST7735_BLUE 0x001F    // 蓝色
+#define ST7735_RED 0xF800     // 红色
+#define ST7735_GREEN 0x07E0   // 绿色
+#define ST7735_CYAN 0x07FF    // 青色
+#define ST7735_MAGENTA 0xF81F // 洋红
+#define ST7735_YELLOW 0xFFE0  // 黄色
+#define ST7735_WHITE 0xFFFF   // 白色
+#define ST7735_COLOR565(r, g, b) (((r & 0xF8) << 8) | ((g & 0xFC) << 3) | ((b & 0xF8) >> 3))
+
+/**
+ * @brief 定义了可用的伽马校准值的枚举类型
+ *
+ * 这个枚举类型 GammaDef 定义了一系列常量，代表了不同的伽马校准值。
+ * 伽马校准用于调整显示设备的输出，以确保颜色的准确还原。
+ * 每个枚举值都对应于一个特定的伽马值，用于在代码中方便地选择和应用不同的伽马校准设置。
+ */
+typedef enum
+{
+    GAMMA_10 = 0x01, // 代表伽马值为1.0的校准设置
+    GAMMA_25 = 0x02, // 代表伽马值为2.5的校准设置
+    GAMMA_22 = 0x04, // 代表伽马值为2.2的校准设置
+    GAMMA_18 = 0x08  // 代表伽马值为1.8的校准设置
+} GammaDef;
+
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+    // call before initializing any SPI devices
+    // 解释：在初始化任何SPI设备之前调用此函数，以确保SPI通信的正确性
+    void ST7735_Unselect();
+
+    // 初始化ST7735显示屏
+    // 解释：在使用ST7735显示屏之前，必须调用此函数进行初始化设置
+    void ST7735_Init(void);
+
+    // 在指定位置绘制一个像素点
+    // 参数：x - 像素点的X坐标；y - 像素点的Y坐标；color - 像素点的颜色
+    // 解释：此函数用于在显示屏上的特定位置绘制一个单一颜色的像素点
+    void ST7735_DrawPixel(uint16_t x, uint16_t y, uint16_t color);
+
+    // 在指定位置写入字符串
+    // 参数：x - 字符串起始X坐标；y - 字符串起始Y坐标；str - 要写入的字符串；font - 字体定义；color - 字符颜色；bgcolor - 背景颜色
+    // 解释：此函数用于在显示屏上的指定位置写入字符串，可以指定字体、字符颜色和背景颜色
+    void ST7735_WriteString(uint16_t x, uint16_t y, const char *str, FontDef *font, uint16_t color, uint16_t bgcolor);
+
+    // 填充指定矩形区域
+    // 参数：x - 矩形起始X坐标；y - 矩形起始Y坐标；w - 矩形宽度；h - 矩形高度；color - 填充颜色
+    // 解释：此函数用于填充显示屏上的一个矩形区域，可以指定填充颜色
+    void ST7735_FillRectangle(uint16_t x, uint16_t y, uint16_t w, uint16_t h, uint16_t color);
+
+    // 快速填充指定矩形区域
+    // 参数：x - 矩形起始X坐标；y - 矩形起始Y坐标；w - 矩形宽度；h - 矩形高度；color - 填充颜色
+    // 解释：此函数是填充矩形区域的快速版本，用于提高填充速度
+    void ST7735_FillRectangleFast(uint16_t x, uint16_t y, uint16_t w, uint16_t h, uint16_t color);
+
+    // 填充整个屏幕为指定颜色
+    // 参数：color - 填充颜色
+    // 解释：此函数用于将整个显示屏填充为单一颜色
+    void ST7735_FillScreen(uint16_t color);
+
+    // 快速填充整个屏幕为指定颜色
+    // 参数：color - 填充颜色
+    // 解释：此函数是填充整个屏幕的快速版本，用于提高填充速度
+    void ST7735_FillScreenFast(uint16_t color);
+
+    // 在指定位置绘制图像
+    // 参数：x - 图像起始X坐标；y - 图像起始Y坐标；w - 图像宽度；h - 图像高度；data - 图像数据
+    // 解释：此函数用于在显示屏上的指定位置绘制图像，图像数据以数组形式提供
+    void ST7735_DrawImage(uint16_t x, uint16_t y, uint16_t w, uint16_t h, const uint16_t *data);
+
+    // 反转显示屏颜色
+    // 参数：invert - 是否反转颜色（true/false）
+    // 解释：此函数用于反转显示屏上的颜色，可用于显示反转效果
+    void ST7735_InvertColors(bool invert);
+
+    // 设置显示屏的伽马曲线
+    // 参数：gamma - 伽马曲线定义
+    // 解释：此函数用于设置显示屏的伽马曲线，以调整显示效果
+    void ST7735_SetGamma(GammaDef gamma);
+
+#ifdef __cplusplus
+}
+#endif
+/* DISPLAY_USING_TOUCHGFX */
+
+#endif //_ST7735S_H
--- a/Core/Bsp/BSP_WF_24/dx_wf_24.c
+++ b/Core/Bsp/BSP_WF_24/dx_wf_24.c
@@ -234,7 +234,7 @@ uint8_t WIFI_Connect_MQTT(const char *wifi_ssid, const char *wifi_pass,
  WIFI_WaitEvent("+MQTTDISCONNECTED", NULL, 2000);

  /* 稍微延时，避免状态机还没稳定 */
-  osDelay(200);
+  osDelay(500);

  // 设置SNTP服务器，设置成功会自动重启模块
  elog_i(TAG,"设置SNTP服务器");
@@ -591,9 +591,10 @@ uint8_t WIFI_Enable_SNTP(void) {
        return 0;
    }

-    osDelay(10000); // 等待模块重启并连接到SNTP服务器
+   
    
    elog_i(TAG, "SNTP服务器配置成功，模块将自动重启以应用设置");
+     osDelay(15000); // 等待模块重启并连接到SNTP服务器
    return 1;
 }

--- a/Core/Inc/rtc.h
+++ b/Core/Inc/rtc.h
@@ -0,0 +1,52 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file    rtc.h
+  * @brief   This file contains all the function prototypes for
+  *          the rtc.c file
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2026 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __RTC_H__
+#define __RTC_H__
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+extern RTC_HandleTypeDef hrtc;
+
+/* USER CODE BEGIN Private defines */
+
+/* USER CODE END Private defines */
+
+void MX_RTC_Init(void);
+
+/* USER CODE BEGIN Prototypes */
+
+/* USER CODE END Prototypes */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __RTC_H__ */
+
--- a/Core/Inc/stm32f1xx_hal_conf.h
+++ b/Core/Inc/stm32f1xx_hal_conf.h
@@ -57,7 +57,7 @@
 /*#define HAL_HCD_MODULE_ENABLED   */
 /*#define HAL_PWR_MODULE_ENABLED   */
 /*#define HAL_RCC_MODULE_ENABLED   */
-/*#define HAL_RTC_MODULE_ENABLED   */
+#define HAL_RTC_MODULE_ENABLED
 /*#define HAL_SD_MODULE_ENABLED   */
 /*#define HAL_MMC_MODULE_ENABLED   */
 /*#define HAL_SDRAM_MODULE_ENABLED   */
--- a/Core/Inc/stm32f1xx_it.h
+++ b/Core/Inc/stm32f1xx_it.h
@@ -22,7 +22,7 @@
 #define __STM32F1xx_IT_H

 #ifdef __cplusplus
- extern "C" {
+extern "C" {
 #endif

 /* Private includes ----------------------------------------------------------*/
@@ -52,6 +52,7 @@ void MemManage_Handler(void);
 void BusFault_Handler(void);
 void UsageFault_Handler(void);
 void DebugMon_Handler(void);
+void DMA1_Channel3_IRQHandler(void);
 void DMA1_Channel4_IRQHandler(void);
 void DMA1_Channel5_IRQHandler(void);
 void USART1_IRQHandler(void);
--- a/Core/Src/dma.c
+++ b/Core/Src/dma.c
@@ -43,6 +43,9 @@ void MX_DMA_Init(void)
  __HAL_RCC_DMA1_CLK_ENABLE();

  /* DMA interrupt init */
+  /* DMA1_Channel3_IRQn interrupt configuration */
+  HAL_NVIC_SetPriority(DMA1_Channel3_IRQn, 5, 0);
+  HAL_NVIC_EnableIRQ(DMA1_Channel3_IRQn);
  /* DMA1_Channel4_IRQn interrupt configuration */
  HAL_NVIC_SetPriority(DMA1_Channel4_IRQn, 5, 0);
  HAL_NVIC_EnableIRQ(DMA1_Channel4_IRQn);
--- a/Core/Src/freertos.c
+++ b/Core/Src/freertos.c
@@ -25,10 +25,12 @@

 /* Private includes ----------------------------------------------------------*/
 /* USER CODE BEGIN Includes */
+#include "device_ctrl.h"
 #include "dx_wf_24.h"
 #include "elog.h"
-#include "string.h"
-#include "device_ctrl.h"
+#include "spi_st7735s.h"
+#include "stdio.h"
+
 /* USER CODE END Includes */

 /* Private typedef -----------------------------------------------------------*/
@@ -39,6 +41,7 @@
 /* Private define ------------------------------------------------------------*/
 /* USER CODE BEGIN PD */
 #define TAG "Main"
+
 /* USER CODE END PD */

 /* Private macro -------------------------------------------------------------*/
@@ -55,7 +58,7 @@ osThreadId_t defaultTaskHandle;
 const osThreadAttr_t defaultTask_attributes = {
  .name = "defaultTask",
  .stack_size = 256 * 4,
-  .priority = (osPriority_t) osPriorityNormal,
+  .priority = (osPriority_t) osPriorityHigh1,
 };
 /* Definitions for wifi_mqtt */
 osThreadId_t wifi_mqttHandle;
@@ -64,6 +67,13 @@ const osThreadAttr_t wifi_mqtt_attributes = {
  .stack_size = 3000 * 4,
  .priority = (osPriority_t) osPriorityHigh,
 };
+/* Definitions for LCD_SHOW_Task */
+osThreadId_t LCD_SHOW_TaskHandle;
+const osThreadAttr_t LCD_SHOW_Task_attributes = {
+  .name = "LCD_SHOW_Task",
+  .stack_size = 1024 * 4,
+  .priority = (osPriority_t) osPriorityHigh,
+};

 /* Private function prototypes -----------------------------------------------*/
 /* USER CODE BEGIN FunctionPrototypes */
@@ -72,6 +82,7 @@ const osThreadAttr_t wifi_mqtt_attributes = {

 void StartDefaultTask(void *argument);
 extern void wifi_task_mqtt(void *argument);
+void LCD_Task(void *argument);

 void MX_FREERTOS_Init(void); /* (MISRA C 2004 rule 8.1) */

@@ -82,9 +93,7 @@ void MX_FREERTOS_Init(void); /* (MISRA C 2004 rule 8.1) */
  */
 void MX_FREERTOS_Init(void) {
  /* USER CODE BEGIN Init */
-  easylogger_init(); // 初始化日志系统
-  __enable_irq();    // 开启全局中断
-
+  ST7735_Init(); // 初始化ST7735显示屏
  /* USER CODE END Init */

  /* USER CODE BEGIN RTOS_MUTEX */
@@ -110,6 +119,9 @@ void MX_FREERTOS_Init(void) {
  /* creation of wifi_mqtt */
  wifi_mqttHandle = osThreadNew(wifi_task_mqtt, NULL, &wifi_mqtt_attributes);

+  /* creation of LCD_SHOW_Task */
+  LCD_SHOW_TaskHandle = osThreadNew(LCD_Task, NULL, &LCD_SHOW_Task_attributes);
+
  /* USER CODE BEGIN RTOS_THREADS */
  /* add threads, ... */
  /* USER CODE END RTOS_THREADS */
@@ -130,6 +142,12 @@ void MX_FREERTOS_Init(void) {
 void StartDefaultTask(void *argument)
 {
  /* USER CODE BEGIN StartDefaultTask */
+  // 1. 打开运行灯
+  Device_Control(DEVICE_LED_RUN, 1);
+
+  // 2. 初始化日志和屏幕（在 RTOS 任务中）
+  easylogger_init();
+
  /* Infinite loop */
  for (;;) {

@@ -141,6 +159,51 @@ void StartDefaultTask(void *argument)
  /* USER CODE END StartDefaultTask */
 }

+/* USER CODE BEGIN Header_LCD_Task */
+/**
+ * @brief Function implementing the LCD_SHOW_Task thread.
+ * @param argument: Not used
+ * @retval None
+ */
+/* USER CODE END Header_LCD_Task */
+void LCD_Task(void *argument)
+{
+  /* USER CODE BEGIN LCD_Task */
+
+  char time_str[16];
+  SNTP_Time_t now;
+  uint16_t text_color = ST7735_BLACK;
+  uint16_t bg_color = ST7735_WHITE;
+
+  // 显示时间的区域大小，假设字体16x24
+  const uint16_t x = 0;
+  const uint16_t y = 0;
+  const uint16_t w = 6 * 16; // 6个字符，每个字符16px宽
+  const uint16_t h = 24;     // 高度与字体匹配
+  /* Infinite loop */
+  for (;;) {
+    if (WIFI_Is_Time_Valid()) {
+      WIFI_Get_SNTP_Time();
+      now = WIFI_Get_Current_Time();
+      if (now.valid) {
+        snprintf(time_str, sizeof(time_str), "%02d:%02d:%02d", now.hour,
+                 now.minute, now.second);
+      } else {
+        snprintf(time_str, sizeof(time_str), "--:--:--");
+      }
+
+      // 先清空显示区域
+      ST7735_FillRectangleFast(x, y, w, h, bg_color);
+
+      // 写入时间
+      ST7735_WriteString(x, y, time_str, &Font_16x26, text_color, bg_color);
+    }
+
+    osDelay(1000);
+  }
+  /* USER CODE END LCD_Task */
+}
+
 /* Private application code --------------------------------------------------*/
 /* USER CODE BEGIN Application */

--- a/Core/Src/main.c
+++ b/Core/Src/main.c
@@ -21,6 +21,7 @@
 #include "cmsis_os.h"
 #include "dma.h"
 #include "i2c.h"
+#include "rtc.h"
 #include "spi.h"
 #include "usart.h"
 #include "gpio.h"
@@ -28,6 +29,7 @@
 /* Private includes ----------------------------------------------------------*/
 /* USER CODE BEGIN Includes */

+
 /* USER CODE END Includes */

 /* Private typedef -----------------------------------------------------------*/
@@ -56,6 +58,7 @@ void SystemClock_Config(void);
 void MX_FREERTOS_Init(void);
 /* USER CODE BEGIN PFP */

+
 /* USER CODE END PFP */

 /* Private user code ---------------------------------------------------------*/
@@ -71,6 +74,7 @@ PUTCHAR_PROTOTYPE {
  return ch;
 }

+/* USER CODE BEGIN 0 */

 /* USER CODE END 0 */

@@ -109,14 +113,13 @@ int main(void)
  MX_UART5_Init();
  MX_USART1_UART_Init();
  MX_USART3_UART_Init();
+  MX_RTC_Init();
  /* USER CODE BEGIN 2 */

  /* USER CODE END 2 */

  /* Init scheduler */
-  osKernelInitialize();
-
-  /* Call init function for freertos objects (in cmsis_os2.c) */
+  osKernelInitialize();  /* Call init function for freertos objects (in cmsis_os2.c) */
  MX_FREERTOS_Init();

  /* Start scheduler */
@@ -145,14 +148,16 @@ void SystemClock_Config(void)
 {
  RCC_OscInitTypeDef RCC_OscInitStruct = {0};
  RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
+  RCC_PeriphCLKInitTypeDef PeriphClkInit = {0};

  /** Initializes the RCC Oscillators according to the specified parameters
  * in the RCC_OscInitTypeDef structure.
  */
-  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
+  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI|RCC_OSCILLATORTYPE_HSE;
  RCC_OscInitStruct.HSEState = RCC_HSE_ON;
  RCC_OscInitStruct.HSEPredivValue = RCC_HSE_PREDIV_DIV1;
  RCC_OscInitStruct.HSIState = RCC_HSI_ON;
+  RCC_OscInitStruct.LSIState = RCC_LSI_ON;
  RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
  RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
  RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL9;
@@ -174,6 +179,12 @@ void SystemClock_Config(void)
  {
    Error_Handler();
  }
+  PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_RTC;
+  PeriphClkInit.RTCClockSelection = RCC_RTCCLKSOURCE_LSI;
+  if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK)
+  {
+    Error_Handler();
+  }
 }

 /* USER CODE BEGIN 4 */
@@ -193,7 +204,8 @@ void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim)
  /* USER CODE BEGIN Callback 0 */

  /* USER CODE END Callback 0 */
-  if (htim->Instance == TIM5) {
+  if (htim->Instance == TIM5)
+  {
    HAL_IncTick();
  }
  /* USER CODE BEGIN Callback 1 */
@@ -215,8 +227,7 @@ void Error_Handler(void)
  }
  /* USER CODE END Error_Handler_Debug */
 }
-
-#ifdef  USE_FULL_ASSERT
+#ifdef USE_FULL_ASSERT
 /**
  * @brief  Reports the name of the source file and the source line number
  *         where the assert_param error has occurred.
--- a/Core/Src/rtc.c
+++ b/Core/Src/rtc.c
@@ -0,0 +1,120 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file    rtc.c
+  * @brief   This file provides code for the configuration
+  *          of the RTC instances.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2026 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+/* Includes ------------------------------------------------------------------*/
+#include "rtc.h"
+
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+
+RTC_HandleTypeDef hrtc;
+
+/* RTC init function */
+void MX_RTC_Init(void)
+{
+
+  /* USER CODE BEGIN RTC_Init 0 */
+
+  /* USER CODE END RTC_Init 0 */
+
+  RTC_TimeTypeDef sTime = {0};
+  RTC_DateTypeDef DateToUpdate = {0};
+
+  /* USER CODE BEGIN RTC_Init 1 */
+
+  /* USER CODE END RTC_Init 1 */
+
+  /** Initialize RTC Only
+  */
+  hrtc.Instance = RTC;
+  hrtc.Init.AsynchPrediv = RTC_AUTO_1_SECOND;
+  hrtc.Init.OutPut = RTC_OUTPUTSOURCE_ALARM;
+  if (HAL_RTC_Init(&hrtc) != HAL_OK)
+  {
+    Error_Handler();
+  }
+
+  /* USER CODE BEGIN Check_RTC_BKUP */
+
+  /* USER CODE END Check_RTC_BKUP */
+
+  /** Initialize RTC and set the Time and Date
+  */
+  sTime.Hours = 0x0;
+  sTime.Minutes = 0x0;
+  sTime.Seconds = 0x0;
+
+  if (HAL_RTC_SetTime(&hrtc, &sTime, RTC_FORMAT_BCD) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  DateToUpdate.WeekDay = RTC_WEEKDAY_MONDAY;
+  DateToUpdate.Month = RTC_MONTH_JANUARY;
+  DateToUpdate.Date = 0x1;
+  DateToUpdate.Year = 0x0;
+
+  if (HAL_RTC_SetDate(&hrtc, &DateToUpdate, RTC_FORMAT_BCD) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /* USER CODE BEGIN RTC_Init 2 */
+
+  /* USER CODE END RTC_Init 2 */
+
+}
+
+void HAL_RTC_MspInit(RTC_HandleTypeDef* rtcHandle)
+{
+
+  if(rtcHandle->Instance==RTC)
+  {
+  /* USER CODE BEGIN RTC_MspInit 0 */
+
+  /* USER CODE END RTC_MspInit 0 */
+    HAL_PWR_EnableBkUpAccess();
+    /* Enable BKP CLK enable for backup registers */
+    __HAL_RCC_BKP_CLK_ENABLE();
+    /* RTC clock enable */
+    __HAL_RCC_RTC_ENABLE();
+  /* USER CODE BEGIN RTC_MspInit 1 */
+
+  /* USER CODE END RTC_MspInit 1 */
+  }
+}
+
+void HAL_RTC_MspDeInit(RTC_HandleTypeDef* rtcHandle)
+{
+
+  if(rtcHandle->Instance==RTC)
+  {
+  /* USER CODE BEGIN RTC_MspDeInit 0 */
+
+  /* USER CODE END RTC_MspDeInit 0 */
+    /* Peripheral clock disable */
+    __HAL_RCC_RTC_DISABLE();
+  /* USER CODE BEGIN RTC_MspDeInit 1 */
+
+  /* USER CODE END RTC_MspDeInit 1 */
+  }
+}
+
+/* USER CODE BEGIN 1 */
+
+/* USER CODE END 1 */
--- a/Core/Src/spi.c
+++ b/Core/Src/spi.c
@@ -25,6 +25,7 @@
 /* USER CODE END 0 */

 SPI_HandleTypeDef hspi1;
+DMA_HandleTypeDef hdma_spi1_tx;

 /* SPI1 init function */
 void MX_SPI1_Init(void)
@@ -44,7 +45,7 @@ void MX_SPI1_Init(void)
  hspi1.Init.CLKPolarity = SPI_POLARITY_LOW;
  hspi1.Init.CLKPhase = SPI_PHASE_1EDGE;
  hspi1.Init.NSS = SPI_NSS_SOFT;
-  hspi1.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_4;
+  hspi1.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_8;
  hspi1.Init.FirstBit = SPI_FIRSTBIT_MSB;
  hspi1.Init.TIMode = SPI_TIMODE_DISABLE;
  hspi1.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE;
@@ -81,6 +82,23 @@ void HAL_SPI_MspInit(SPI_HandleTypeDef* spiHandle)
    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
    HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);

+    /* SPI1 DMA Init */
+    /* SPI1_TX Init */
+    hdma_spi1_tx.Instance = DMA1_Channel3;
+    hdma_spi1_tx.Init.Direction = DMA_MEMORY_TO_PERIPH;
+    hdma_spi1_tx.Init.PeriphInc = DMA_PINC_DISABLE;
+    hdma_spi1_tx.Init.MemInc = DMA_MINC_ENABLE;
+    hdma_spi1_tx.Init.PeriphDataAlignment = DMA_PDATAALIGN_BYTE;
+    hdma_spi1_tx.Init.MemDataAlignment = DMA_MDATAALIGN_BYTE;
+    hdma_spi1_tx.Init.Mode = DMA_NORMAL;
+    hdma_spi1_tx.Init.Priority = DMA_PRIORITY_MEDIUM;
+    if (HAL_DMA_Init(&hdma_spi1_tx) != HAL_OK)
+    {
+      Error_Handler();
+    }
+
+    __HAL_LINKDMA(spiHandle,hdmatx,hdma_spi1_tx);
+
  /* USER CODE BEGIN SPI1_MspInit 1 */

  /* USER CODE END SPI1_MspInit 1 */
@@ -104,6 +122,8 @@ void HAL_SPI_MspDeInit(SPI_HandleTypeDef* spiHandle)
    */
    HAL_GPIO_DeInit(GPIOA, GPIO_PIN_5|GPIO_PIN_7);

+    /* SPI1 DMA DeInit */
+    HAL_DMA_DeInit(spiHandle->hdmatx);
  /* USER CODE BEGIN SPI1_MspDeInit 1 */

  /* USER CODE END SPI1_MspDeInit 1 */
--- a/Core/Src/stm32f1xx_hal_timebase_tim.c
+++ b/Core/Src/stm32f1xx_hal_timebase_tim.c
@@ -52,7 +52,7 @@ HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority)
  /* Enable TIM5 clock */
  __HAL_RCC_TIM5_CLK_ENABLE();

-/* Get clock configuration */
+  /* Get clock configuration */
  HAL_RCC_GetClockConfig(&clkconfig, &pFLatency);

  /* Get APB1 prescaler */
@@ -74,12 +74,11 @@ HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority)
  htim5.Instance = TIM5;

  /* Initialize TIMx peripheral as follow:
-
-  + Period = [(TIM5CLK/1000) - 1]. to have a (1/1000) s time base.
-  + Prescaler = (uwTimclock/1000000 - 1) to have a 1MHz counter clock.
-  + ClockDivision = 0
-  + Counter direction = Up
-  */
+   * Period = [(TIM5CLK/1000) - 1]. to have a (1/1000) s time base.
+   * Prescaler = (uwTimclock/1000000 - 1) to have a 1MHz counter clock.
+   * ClockDivision = 0
+   * Counter direction = Up
+   */
  htim5.Init.Period = (1000000U / 1000U) - 1U;
  htim5.Init.Prescaler = uwPrescalerValue;
  htim5.Init.ClockDivision = 0;
--- a/Core/Src/stm32f1xx_it.c
+++ b/Core/Src/stm32f1xx_it.c
@@ -56,6 +56,7 @@
 /* USER CODE END 0 */

 /* External variables --------------------------------------------------------*/
+extern DMA_HandleTypeDef hdma_spi1_tx;
 extern DMA_HandleTypeDef hdma_usart1_tx;
 extern DMA_HandleTypeDef hdma_usart1_rx;
 extern UART_HandleTypeDef huart1;
@@ -163,6 +164,20 @@ void DebugMon_Handler(void)
 /* please refer to the startup file (startup_stm32f1xx.s).                    */
 /******************************************************************************/

+/**
+  * @brief This function handles DMA1 channel3 global interrupt.
+  */
+void DMA1_Channel3_IRQHandler(void)
+{
+  /* USER CODE BEGIN DMA1_Channel3_IRQn 0 */
+
+  /* USER CODE END DMA1_Channel3_IRQn 0 */
+  HAL_DMA_IRQHandler(&hdma_spi1_tx);
+  /* USER CODE BEGIN DMA1_Channel3_IRQn 1 */
+
+  /* USER CODE END DMA1_Channel3_IRQn 1 */
+}
+
 /**
  * @brief This function handles DMA1 channel4 global interrupt.
  */